42x weber pluscalc Hybrid interior render for smoothing and trowelling 30kg
Scope of application
weber pluscalc is a hybrid interior render with lime-like properties. It is made from graded sands and a CO2-reduced special binder. weber pluscalc can be used throughout the interior on masonry of all types, render substrates, concrete with bonding slurry, particularly in bio-ecological building and for demanding refurbishment in listed building conservation. As a base coat
and as a paint-ready finishing render, including damp areas such as domestic kitchens and bathrooms or on ceilings and walls. On weber pluscalc all mineral finishing coats from Weber and all solvent-free paints can be applied. weber pluscalc is easy to apply and is suitable for both smoothing and trowelling. The building-physics properties, such as good room moisture regulation and vapour diffusion openness, create a healthy and comfortable indoor climate. weber pluscalc is mould and mildew inhibiting thanks to its high pH value. The special low-stress hardening process gives the weber pluscalc maximum crack resistance.
General notes
- No additives may be mixed into the mortar.
- During application and drying, the temperature of the air, the materials used and the substrate must not fall below + 5° C.
- Protect fresh render from frost and rapid drying for at least 24 hours.
- Application and execution in accordance with DIN 18 350 VOB/C and DIN 18 550.
- Coverage information refers to the minimum layer thickness and may vary depending on the substrate and application. Exact coverage values must be determined by test areas on site.
- Adjacent components must be separated from the render system.
Special notes
- weber pluscalc is suitable for indoor use as a bedding base for tiles and slabs up to a total weight of thin-bed mortar and tiles of 25 kg/m².
- Paint: After drying, it is possible to apply conventional weber paints in accordance with BFS leaflet No. 10 (e.g. weber pluscalc interior paint or weber.cal lime paint)
Schanzenstraße 84
Nordrhein-Westfalen
Düsseldorf, Deutschland, 40549
info@sg-weber.de
https://www.sg-weber.de
Schanzenstraße 84
Nordrhein-Westfalen
Düsseldorf, Deutschland, 40549
info@sg-weber.de
https://www.sg-weber.de
- Color: 12, 5 mm GKP
- Container: Bag
- Application area: - 20 °C to + 80 °C
- Surface weight: Bright aluminum
- Grains: L-shaped edging profiles
- Standing height: Suitable for damp rooms
- Number of rungs: 23/31
- Application area: Wand
- Item weight: 1.260,00 kg
- Content: 1.260,00 kg