STONES EASY weed-suppressing paving joint sand 1-5mm 20kg

Weed-suppressing paving joint sand – buy STONES EASY online

STONES EASY paving joint weed-suppressing is an unstabilised paving jointing mortar sand for re-pointing and restoration of concrete, clinker and natural stone paving.

The blend of dried sands and an environmentally friendly compound has weed-suppressing properties. Quality Made in Germany – without health-hazardous emissions – for a well-kept outdoor area.

Guaranteed free from cement and artificial polymers. STONES EASY paving joint weed-suppressing is suitable for water-permeable unbound bedding for particularly narrow joints of 1–5 mm.

The jointing sand is available in the colours Light, Grey and Anthracite.

Follow steps 1–3:

• 1. Pour the material from a low height onto the dry surface. Sweep the jointing material crosswise into the joints and fill them completely up to the chamfer. Make sure you work the jointing material into the joints in small areas. Remove the fine dust from the stone surface carefully with a soft broom. The stone surface must not show any residue of fine particles before the vibrating plate is used. Vibrate the area at least twice. If cleaning is neglected, residues may soil the stone surface.

• 2. For complete joint filling, it is recommended to re-compact the joint using a suitable tool! If necessary, top up any defects after re-compaction.

• 3. If required, carefully fill the joint again up to the chamfer and remove the fine dust thoroughly from the stone surface with a fine broom. The joint height should be slightly below the stone surface. Jointing material that is raised above the stone surface can be washed out and lead to discolouration of the stone surface