KAIM Standard storage

STANDARD slab supports

With PLATTENFIX, top quality is standard: even our cost-effective base model STANDARD slab supports impress with well thought-out functionality and are particularly easy to install.

Simple, quick, cost-effective: STANDARD slab supports from PLATTENFIX can be installed quickly even without extensive DIY know-how. Thanks to the four separable sections of the slab support, you can easily cut out edge and corner pieces without much tooling. If you need to compensate for different heights, simply use additional levelling washers. The slabs are installed dry – completely without a bedding layer of gravel.

With little effort, you achieve a uniform, professional slab surface for balconies, terraces, walkways and even flat roofs. 

Slab supports for the optimum installation of floor slabs 

As the slabs are raised and do not touch the ground at all, rainwater can drain away unhindered and, in winter, no frost damage occurs. Incidentally, PLATTENFIX supports are made up of 100% recycled soft PVC.

STANDARD slab supports have a bearing height of 10 mm and are available in joint widths of 3 mm, 4 mm and 6 mm. They are supplied with a joint web of 10 or 20 mm height or without a joint web. The internal labyrinth of the slab support ensures good water drainage. All STANDARD slab supports can be divided into 2 halves or 4 corners, but they are also available as edge pieces. To compensate for minor unevenness, the STANDARD levelling washer is available in 2.6 mm, or levelling shims in 1 mm.