Lithofin MN Farbvertiefer

Lithofin MN Colour Deepener for Natural and Concrete Worktop

Description

Pulli A specialized product from the LITHOFIN range for natural marble and concrete worktop MN

Ready-to-use impregnating agent based on siloxane with special color-enhancing additives dissolved in organic solvents

Properties

• Lithofin MN Colour Deepener penetrates the surface, making it water-repellent and enhancing the natural color and texture without creating a gloss. The surfaces appear more vibrant and fresher, almost like wet.
• The water-repellent effect reduces dirt accumulation and stain sensitivity and facilitates cleaning. No surface film is formed, so the vapor permeability remains largely unaffected. The slip resistance of the coating is hardly altered.

Durability

Practically unlimited indoors with proper maintenance. Outdoors, depending on the type of stone and weather exposure, the color-enhancing effect lasts approximately 1-2 years, and the protective effect lasts about 5-7 years. When the effect diminishes, it can be reapplied multiple times.

Technical Data

• Density approx. 0.85 g/cm³
• Flash point approx. 25°C
• Appearance: colorless, clear
• Odor: aromatic
• Solubility in water: insoluble

Application Area

For color intensification of wall and floor coverings, stairs, entrance areas, terraces, etc., that appear too pale or colorless or need to be matched to a polished surface. Suitable for indoor and outdoor use.

Substrates

All absorbent porous natural stones with a coarse-grained, sawn, or flamed surface such as granite, gneiss, porphyry, marble, limestone, slate, Solnhofen slabs, as well as concrete stones with a rough surface. Note: For polished and very finely ground natural and concrete stones, we recommend Lithofin FLECKSTOP, Lithofin MN Fleckstop, or Lithofin MN Grundschutz.

Processing

The substrate must be absorbent, clean, stain-free, and completely dry. It is recommended to create a test surface.

Apply Lithofin MN Colour Deepener evenly with a clean roller, sealing brush, or flat brush, and allow to soak in. Additional coats may be necessary on highly absorbent substrates. Excessive application can cause gloss on weakly absorbent surfaces, which can be prevented by removing the excess with a dry cloth before drying.

Note

Only treat fully dried surfaces. Drying times for newly laid surfaces can be up to 8 weeks; otherwise, a few days after rain or cleaning. Non-absorbent surfaces such as polished or fired materials like clinker, fine stoneware, etc., cannot be treated. Glass, polished surfaces, wood, and painted surfaces, plastics, and other sensitive surfaces must be protected from splashes. Do not process in direct sunlight or at surface temperatures below 5°C or above 25°C.

Cleaning of tools with solvent. Drying time: walkable after approx. 30 minutes, complete drying within 24 hours.

Coverage: approx. 5-10 m² per liter, depending on the type of surface.

Storage

Store in a cool, dry, sealed container. Do not exceed 25°C. Shelf life: approximately 4 years.

Transport Data

Extended Transport Data

Occupational Safety and Storage

GHS Label

Safety Label