PCI FLEXMOERTEL S1 deformable tile adhesive specifically for large-format floor tiles
Product features
- Meets C2TE S1 according to DIN EN 12 004 and guidelines for flexible mortars
- Deformable, compensates for stresses caused by temperature fluctuations and shrinkage
- High stability even with heavy tiles
- Suitable for adhesive thicknesses from 1 to 10 mm
- Very low emissions GEV EMICODE EC 1 PLUS R
- Chromate-reduced according to TRGS 613
- Waterproof and temperature-resistant from -30°C to +80°C
- Universal indoor and outdoor use on walls and floors
- EMICODE EC 1 PLUS R
Color: gray
Delivery form: 20 kg sack
Application area
- For indoor and outdoor use
- For walls and floors
- For the flexible bonding of tiles and slabs
- For bedding cement screeds with a residual moisture of at least 4 CM
- For laying ceramics on all PCI bonded waterproofing systems
- For laying on heated screeds
- For installation in swimming pools, around pools, in wet rooms, and cool rooms
- For laying on cast asphalt (only indoor) and all cement- and gypsum-bound substrates, including glass and porcelain mosaics, firmly adhering PVC coverings, and old ceramic coverings
- For installing polyurethane foam panels on basement walls, perimeter insulation on plaster, concrete, masonry, and sealing joints
- For mineral fiber panels (e.g., Isover or Rockwool), bonded rigid foam panels (e.g., Styropor or Hostapor), extruded rigid foam panels (e.g., Styrodur)
For filling and leveling minor unevenness on walls and floors prior to tile installation
Safety Data Sheet
| Safety Data Sheet | |
|---|---|
| Label | Safety Data Sheet PDF |
| Revised by supplier on | 20.07.2016 |
| GHS hazard statement | |
Work safety and storage
| Work safety and storage | |
|---|---|
| Hazard pictograms | H315Causes skin irritation H318Causes serious eye damage H335May cause respiratory irritation |
| Precautionary statements | Please observe section 22 of the safety data sheet P102Keep out of reach of children P261Avoid inhalation of dust, fumes, gas, mist, vapors, aerosols P264Wash thoroughly after handling P280Wear protective gloves, protective clothing, eye protection, face protection P302+P352IF ON SKIN: Wash with plenty of water P304+P340IF INHALED: Bring the person into fresh air and ensure unrestricted breathing P305+P351+P338IF IN CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P315Seek immediate medical advice and assistance P332+P313If skin irritation occurs: Seek medical advice P362+P364Remove contaminated clothing and wash before reuse |
| Storage classes | |
| Non-combustible solid | |
| Water hazard class | 1 - Slightly water hazardous |
Hazard
Signal word: Danger
GHS pictograms
Ingredients
| CAS Number | Intended Use | Substance Name |
|---|---|---|
| 65997-15-1 |
- Container: Bag
- Item weight: 20,10 kg
- Content: 20,00 kg
- GoogleShopping: BP10
