.png)
ALUJET Floorjet SPEED sealing membrane matt 1,5x50m
The ALUJET Floorjet SPEED / ALUJET Floorjet SPEED matt is a heat-reflecting, bitumen-free sealing membrane for sealing on ground-contact floor slabs against rising damp and ground moisture. Suitability has been demonstrated by compliance with the requirements of DIN EN 13967 and taking into account the construction type via a general building authority test certificate (P-1200/271/15-MPA BS).
The ALUJET Floorjet SPEED / ALUJET Floorjet SPEED matt meets the requirements of DIN EN 13967:2012. The ALUJET Floorjet SPEED / ALUJET Floorjet SPEED matt is used as a sealing membrane for the structural waterproofing of floor slabs against rising moisture or ground moisture (load case in accordance with DIN 18195-4 as well as W1.1-E and W1.2-E in accordance with DIN 18533-1) for sealing screed constructions. The ALUJET Floorjet SPEED / ALUJET Floorjet SPEED matt can also be used on intermediate floors as a sealing membrane for the structural waterproofing of floor slabs. The relevant building-physics conditions and site-specific requirements must be taken into account.
ALUJET Allfixx 600 ml
The ALUJET Allfixx is a water- and solvent-free adhesive mortar for indoor and outdoor use. The main areas of application are bonding underlay and under-roofing membranes, bonding vapour barrier / vapour control membranes in roof and wall areas, and providing a nail sealing for the counter batten. In accordance with DIN 4108-7 and SIA 180.
ALUJET connection strip SPEED 200mm 32,5m slotted liner
The ALUJET connection strip SPEED is a 5-layer, fully surface-bonding composite material for use as a system component of the ALUJET Walljet ALU and the ALUJET Floorjet SPEED.
For bonding the transverse joints in the ALUJET Floorjet SPEED as well as for connecting to upstands and to bitumen-free wall damp-proof membranes. For bonding the butt joints of the ALUJET Walljet ALU at overlaps of less than 200 mm. Furthermore, for sealing against splash and seepage water and ground moisture at the wall base (DIN 18533 Part 1 and 2: W4-E). In the inlet and finishing areas at penetrations and upstands (walls, wall bases, door and window frames, etc.), the ALUJET connection strip SPEED also provides the sealing function.
Ahornstraße 7
Baden-Württemberg
Hattenhofen, Deutschland, 82285
[email protected]
https://www.alujet.de
Ahornstraße 7
Baden-Württemberg
Hattenhofen, Deutschland, 82285
[email protected]
https://www.alujet.de
- Color: Black
- Container: Cartridge
- Application area: - 20 °C to + 80 °C
- Application area: Wall
- Temperature resistance: CS II
- Item weight: 112,70 kg
- Content: 1,00 unit
