webertec 945 N Injection Resin EP 5kg transparent to yellowish

webertec 901 Bitumen Primer 5L Coating Adhesive Highly Concentrated Universal Bitumen

Highly concentrated, solvent-free, universally applicable bitumen emulsion

Application Area:
Primer for bituminous thick coatings as well as sealing and protective coatings on concrete, plaster, masonry, steel, and roofing felt. The product can be used as a foundation coat in areas with aggressive groundwater. Furthermore, it is suitable as a primer on trapezoidal sheet metal and for the production of bituminous mortar for structures within the ground or in shaft construction.

Product Description:
webertec 901 is a solvent-free bitumen emulsion.

Composition:
Bitumen emulsion

Processing temperature: >4°C
Density: approx. 1.1 kg/dm³
Application tools: Mason's trowel, roofer's broom, ceiling brush, roller, spray machine
Storage: When stored dry, cool, frost-free in the original sealed container, the material is at least 12 months storage stable.

Consumption / Yield:
As a protective coating with 2 coats: approx. 450 ml/m
As a primer for bituminous thick coatings: approx. 15 - 30 ml/m

Substrate Preparation

• Dry or slightly moist, frost-free masonry, fully jointed, absorbent surfaces should be primed.
• Concrete surfaces should be roughened, and if necessary, filled or leveled with suitable mortar.

Application
As a primer for bituminous thick coatings:

• For priming bituminous thick coatings, webertec 901 should be diluted 1:10 RT with water and applied to the previously cleaned substrate.

As a pre-coating:

• Depending on the absorbency of the substrate and application, the product can be diluted approximately 30% to 70% with water.

As a topcoat for mineral substrates:

• After drying of the primer, 1 to 2 undiluted topcoats are required.

As a primer for bitumen membranes:

• Primer made from 1 RT emulsion and 1.3 RT water.

As a primer for trapezoidal sheets:

• Primer made from 1 RT emulsion and 3 RT water.

Technical Data Sheet Safety Data Sheet

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Revised by supplier on	14102016
Transport Data
UN Number	3082
Substance designation	ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Hazard label	9
Transport category	3
Evaluation factor	1
Extended Transport Data
Limited Quantity	5 L
Expected Quantity	EQ1
Hazardous Goods Unit	0 Metal packaging
Type-approved packaging	container
Occupational Safety and Storage
GHS Signal Word	H315 Causes skin irritation H317 May cause allergic skin reactions H319 Causes serious eye irritation H341 Suspected of causing genetic defects. Specify route of exposure if it is conclusively proven that this hazard exists only via a specific route of exposure. H411 Toxic to aquatic life with long-lasting effects
Precautions	Please observe section 22 of the safety data sheet P280 Wear protective gloves/protective clothing/eye protection/face protection P301P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor P303P361P353 IF ON SKIN or hair: Remove contaminated clothing. Wash skin with water/douche P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor if you feel unwell P501 Dispose of contents/container in accordance with local/regional/national/international regulations
Storage Classes	8A Flammable corrosive hazardous substances
Water Hazard Class	2 water hazardous
Hazards
Signal Word	Danger
GHS Pictograms
Ingredients
CAS Number Absorption Route Substance Name 25068386 2210799 9046100 100516 1477550 2855132 38294643