ACTION - MAPEI Topcem Pronto Grey 25 KG MHD: 04/25

MAPEI TOPCEM PRONTO Grey 25 KG

MHD: 04/2025. Goods from return and warranty excluded.

Product description:

• For producing bonded screeds up to 35 mm, screeds laid on separating layer and floating screeds up to 60 mm in interior and exterior applications, which are intended to have rapid moisture release and rapid readiness for laying as a substrate for parquet, PVC, linoleum, rubber floor coverings, ceramic, engineered and natural stone slabs, carpeted floors etc. A screed properly installed with Topcem Pronto can already be walked on after approx. 12 hrs under standard climatic conditions and can be covered after about 24 hrs with ceramic tiles and slabs. Under these conditions, the areas can be covered after 2 days with dimensionally stable natural stone and engineered stone slabs and after 4 days with moisture-sensitive and dense top floor coverings.
• For bonded screeds and repair work, a bonding slurry, produced in the mixing ratio 250 g Planicrete, 250 g water and 3 kg Topcem Pronto, must be applied.

Technical data:

• Mixing ratio: approx. 1.7 l water per 25 kg Topcem Pronto
• Mixing time: approx. 5 min in a forced-action mixer
• Working time: approx. 60 minutes
• Application: screed and trowel finish
• Walkable: after approx. 12 hours
• Residual moisture: after 4 days < 2.0 CM-%, depending on climatic conditions
• Placement: manually or with conveying equipment
• GISCODE: ZP1 – low-chromate, in accordance with Regulation (EC) No. 1907/2006, Annex XVII
• EMICODE: EC 1 R PLUS – very low emissions
• Storage: in a cool, dry, frost-free environment
• Consumption: approx. 18.0–20.0 kg/m2 per cm of layer thickness, depending on degree of compaction

Safety data sheet
Data sheet	Safety data sheet.pdf
Revised by the supplier on	02.07.2015
Gefkommlink
Occupational safety and storage
H statements GHS	H318 Causes serious eye damage.
P statements	Please refer to section 2.2 of the safety data sheet P261 Avoid breathing dust/smoke/gas/mist/vapours/ aerosol. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water/…. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing. P310 Immediately call a POISON INFORMATION CENTRE/doctor/….
Water hazard class	1 - slightly water-hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS number Reason for inclusion Substance name 14808-60-7 65997-15-1