BAUMIT Lightweight Base Coat MPS 60 S 25kg Cement Render
- Mineral, water-addition-activated, workable, machine-apply lightweight base coat with accelerated setting
- Good trowelable, water-repellent cement mortar with excellent water retention and good substrate adhesion
- Weather- and frost-resistant after drying, diffusion-open, impact- and scratch-resistant
Cement lightweight render type I for manual and machine application Lightweight mortar LW and CS III according to DIN EN 998-1
- Render mortar for use as interior and exterior plaster for walls, pillars, and partition walls
- For machine application on highly stressed masonry or concrete surfaces, such as in the base and basement exterior wall areas and in damp rooms, also suitable for lightweight bricks and aerated concrete of strength class le; 6
- Can be used as base and finish coat
- Base coat for the adhesion of all mineral decorative plasters, textured plasters, and mineral or bituminous waterproofing, as well as a base coat for tile bonding on surfaces with a weight of more than 25 kg/m², including tile adhesive, suitable for residential kitchens, bathrooms, and basements
| Render type | Type I according to DIN 185501 |
| Fire behavior | A1, non-combustible |
| Strength class render | CS III according to DIN EN 998-1 |
| Processing time | 60 min – 120 min |
| Compressive strength | 35 N/mm²; 75 N/mm²; at least 5 N/mm²; |
| Adhesive tensile strength | ? 0.08 N/mm²; |
| Capillary water absorption | Wc 2 according to DIN EN 998-1 |
| ?-value | ? 20 |
| Bulk density | ? 1300 kg/m³; |
| Thermal conductivity | ? 0.390 W/m·K for P 50% |
| Tabular value according to EN 1745 | ? 0.43 W/m·K for P 90% |
| Render mortar group | Lightweight render mortar LW Type I according to DIN EN 998-1 P III according to DIN 18550 |
- Container: 2-3 hours
- Application area: - 20 °C to + 80 °C
- Standing height: CS III
- Application area: Wand
- Grains: 0,00 – 1,20 mm
- Item weight: 1.050,00 kg
- Content: 1.050,00 kg
- GoogleShopping: Hauptsortiment
