12 buckets per pallet Remmers Epoxy MT 100 Primer 2K 25 kg

Remmers Epoxy MT 100 Primer

Rapid primer for matte-damp substrates

Application Area

• Priming, adhesion bridges, leveling layer for residual moisture substrates
• Production of pressure-resistant mortar, liquid screeds
• Base layer for broadcast screeds

Properties

• Substrate tolerant up to 6 % residual moisture according to CMMethod
• Good adhesion on weakly absorbent substrates
• Rapid curing / overcoatable
• Cures from 5 °C
• Mechanically durable
• Chemically resistant
• Free of plasticizers, nonylphenol free
• Physiologically harmless in the cured state
• Suitable as a primer without broadcast under Remmers PU and EP coatings

Safety Data Sheet
Data Sheet	Component A
Revised by supplier on	21022018
Transport Data
UN Number	3082
UN Description	ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Hazard Class	Bisphenol A Epichlorohydrin resins MG lt; 700
Environmental Hazard	Yes
Packaging Group	III
Hazard Label	9
Transport Category	3
Evaluation Factor	1
Extended Transport Data
Limited Quantity	5 L
Expected Quantity	EQ1
Dangerous Goods Unit	6 combination packagings
Occupational Safety and Storage
GHS Labels	EUH205 Contains epoxy compounds, may cause allergic reactions H315 Causes skin irritation H317 May cause allergic skin reactions H319 Causes serious eye irritation H411 Toxic to aquatic life with long-lasting effects
Precautions	Please observe section 22 of the safety data sheet P102 Keep out of reach of children P103 Read all instructions carefully and follow them P262 Do not get in eyes, on skin, or on clothing P264 Wash thoroughly after handling P273 Avoid release to the environment P280 Wear protective gloves / protective clothing / eye protection / face protection / hearing protection P301P310 IF SWALLOWED: Immediately call a POISON CENTER / doctor P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P501 Dispose of contents/container in accordance with local regulations
Storage Classes	10 Flammable liquids not classified under the above storage classes
Water Hazard Class	2 water hazard
Hazards
Signal Word	Caution
GHS Pictograms
Ingredients
CAS Number Basis of Entry Substance Name 25068386 28064144 100516 2461156

Safety Data Sheet K
Data Sheet	Component B
Revised by supplier on	11012018
Transport Data
UN Number	2735
UN Description	POLYAMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class	m-Xylylenediamine
Environmental Hazard	Yes
Packaging Group	II
Hazard Label	8
Transport Category	2
Evaluation Factor	3
Extended Transport Data
Tunnel Code	E
Limited Quantity	1 L
Expected Quantity	EQ2
Dangerous Goods Unit	6 combination packagings
Occupational Safety and Storage
GHS Labels	H314 Causes severe skin burns and eye damage H317 May cause allergic skin reactions H332 Harmful if inhaled H412 Harmful to aquatic life with long-lasting effects
Precautions	Please observe section 22 of the safety data sheet P260 Do not breathe dust/fume/gas/mist/vapors/aerosol P280 Wear protective gloves / protective clothing / eye protection / face protection / hearing protection P303P361P353 IF ON SKIN or hair: Remove contaminated clothing immediately. Wash skin with water or shower P304P340 IF INHALED: Bring the person into fresh air and ensure unobstructed breathing P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P310 Immediately call a POISON CENTER / doctor P321 See special treatment on this label P363 Wash contaminated clothing before reuse P405 Store locked up P501 Dispose of contents/container in accordance with local regulations
Storage Classes	8A Flammable corrosive hazardous substances
Water Hazard Class	2 water hazard
Hazards
Signal Word	Danger
GHS Pictograms
Ingredients
CAS Number Basis of Entry Substance Name 100516 2855132 112572 98544