PCI Pecimor DK bitumen insulation board adhesive 28kg

PCI Pecimor DK 28kg bitumen insulation board adhesive for basement external walls and foundations

Product features:

• Two-component: the water from the bitumen emulsion is fully incorporated into PCI Pecimor DK during curing. This ensures safe and rapid setting of the adhesive even beneath the bonded insulation boards.
• Temperature resistant (after full cure) from – 20 °C to + 80 °C.
• Ageing resistant: in the ground, permanent bonding even after years.
• Chemically curing, even in the absence of air.
• Solvent-free: no environmental or applicator exposure due to solvent vapours; no fire or explosion hazard; no health-harmful vapours.

Colours: black
Available pack sizes: 28-kg pails

Areas of application:

• For walls and floors.
• For interior and exterior use.
• For full-surface or spot bonding of insulation or drainage boards made of EPS, XPS or cellular glass, e.g. polystyrene, Styrodur or Foamglas, onto absorbent and non-absorbent substrates, for bonding the boards to each other, and as a cell-filling coating for cellular glass boards.
• On dry and slightly damp substrates.
• On absorbent and non-absorbent substrates.

Safety data sheet
Data sheet	Safety data sheet.pdf
Revised by the supplier on	19.09.2017
Hazard communication code
Occupational safety and storage
H statements GHS	H315 Causes skin irritation. H319 Causes serious eye irritation.
P statements	Please refer to section 2.2 of the safety data sheet P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P264 After use … wash thoroughly. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P352 P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332+P313 If skin irritation occurs: Get medical advice/attention. P337+P311 P362+P364 Take off contaminated clothing and wash it before reuse.
Storage classes	10 Flammable liquids, flash point > 60°C
Water hazard class	1 - slightly hazardous to water
Hazards
Signal word	Warning
GHS pictograms
Ingredients
CAS number Reason for inclusion Substance name 1310-58-3

Safety data sheet
Data sheet	Safety data sheet.pdf
Revised by the supplier on	07.06.2017
Hazard communication code
Occupational safety and storage
H statements GHS	H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation.
P statements	Please refer to section 2.2 of the safety data sheet P102 Keep out of reach of children. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 After use … wash thoroughly. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water/… P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P315 Get immediate medical advice/attention. P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container …
Storage classes	13 Non-combustible solids
Water hazard class	1 - slightly hazardous to water
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS number Reason for inclusion Substance name 65997-15-1