PCI Polyfix 5 Min BlitzZementMrtel 5kg

PCI Polyfix 5 Min Rapid Cement Mortar for Repair, Fixing, and Mounting

Product Properties

• Fast setting, hardens after approximately 5 minutes, crack-free
• Easy to process, mix only with water
• Can be used without primer or bonding bridges
• High compressive and flexural strength for secure and load-bearing anchors
• Waterproof, weather-resistant, and frost-resistant, suitable for universal indoor and outdoor use
• Chloride-free, does not cause corrosion of steel
• Sulfate-resistant, suitable for wastewater areas

Colors gray

Application Areas

• For indoor and outdoor use
• For anchoring machines, motors, door frames, windows, gates, bolts, stairs, balconies, and bridge components, pipes, etc.
• For fixing steel posts, window sills, and radiator brackets, etc.
• For inserting dowels for prefabricated elements, suspended ceilings, and installing shelves, partitions, etc.
• For filling defects and holes, e.g., after crack injection and crack repairs

Surface Preparation

The substrate must be clean, dust-free, and load-bearing. Before processing, thoroughly clean the substrate. Avoid contamination.

Processing PCI Polyfix 5 Min

Prepare PCI Polyfix 5 Min in a clean mixing container and add the mixing water.

• Mix manually with a spatula or with a suitable mixer, e.g., from Collomix, attached to a drill, until a stiff, plastic mass is formed.
• Process the mixed mortar within 3 minutes.
• Apply the mortar densely and deeply into the breakout area with a spatula.
• Immediately after, apply and possibly model the remaining mortar.
• For larger cavities, PCI Polyfix 5 Min can be pre-mixed with 1 part of coarse, washed, and dried sand (grain size 0 to 4 mm) before mixing with water to achieve a stiff, plastic consistency or use PCI Polyfix plus.

Safety Data Sheet

Occupational Safety and Storage

Ingredients