fischer Einschlaganker II

fischer Einschlaganker EA II

Product description

• Simple impact installation without slipping during mounting due to the recessed edge of the anchor head
• Use of standard metric screws and threaded rods reduces complexity
• Space-saving serial installation with machine setting tool
• EA II SSD
• Visual inspection through recessed area
• ETAZ approval for multiple fastenings

The fischer EA II impact anchor is a female threaded anchor made of galvanised steel. The impact anchor is set into the substrate with a hammer, flush with the surface. Using the EHS Plus impact tool or the EMS machine setting device, the head is expanded by driving in the internal pin, which then expands and tensions against the wall of the drilled hole. For correct expansion, no torque needs to be applied to the screw or threaded rod. The fischer EA II impact anchor is ideal for fixing sprinkler systems, grids, and brackets indoors with approval.

Advantages

• Pre-formed edge prevents the anchor head from slipping down and ensures trouble-free impact installation
• The metric internal thread allows the use of standard screws or threaded rods for optimal adaptation to the application
• The EMS machine setting device enables particularly gentle installation during series installations
• The recessed area created during expansion with the setting tool EHS Plus simplifies the inspection of the anchoring and provides high application safety
• Fixing point on the substructure 25 mm to prevent accidental detachment of the plug before expansion
• The black fixing point prevents the anchor from falling out of the drilled hole during overhead installation

• Concrete C20/25 to C50/60 cracked and uncracked, tension concrete
• Hollow slabs C30/37 to C50/60 for use as multiple fastenings of non-load-bearing systems
• Concrete C20/25 to C50/60 uncracked
• Also suitable for
• Concrete C12/15
• Natural stone with dense grain