weberstar 220 AquaBalance
weberstar 220 Scheibenputz Jura is an exterior and interior topcoat suitable for applying over weberdur base coats and as a surface coating for webertherm thermal insulation and webertherm lightweight thermal composite systems.Product features
- Free of biocides and preservatives
- Surface-active hydrophilic for balanced moisture management
- Quickly structurable for ceilings and walls
- Creates a healthy indoor climate through optimal water vapor permeability
- Offers high impact resistance in class III according to DIN 4108
- Can be processed mechanically and manuallyGeneral notes
Fresh plaster surfaces should be protected from direct sunlight, strong wind, and moisture exposure.
Application and execution according to DIN 18 350 VOB/C and DIN 18 550.
Consumption figures refer to minimum layer thickness and may vary depending on substrate and application. Exact consumption values should be determined through trial applications on site.
Adjacent building components must be separated from the plaster system.Special notes
Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the plaster color tone may differ from the sample. This does not constitute a quality defect or material complaint.
Color deviations caused by application and drying conditions should be corrected with the weberton 414 AquaBalance leveling paint. This leveling coat should be included in specifications and offers.
When painting AquaBalance plaster systems, colors with AquaBalance technology, e.g., weberton 414 AquaBalance, should also be used.
Material should be ordered for a single object as much as possible; different batches should not be mixed.weberstar 220 AquaBalance
with balanced moisture management offers very high and durable protection against algae and mold growth.
Constantly increased humidity and dirt adherence, e.g., in splash water areas with improper drainage or in planting near facades, can promote algae and mold growth.Substrate preparation
The substrate must be load-bearing, dry, and free of dust and substances that reduce adhesion.
The base coat must be level.
Depending on weather conditions, the base coat should be applied in a timely manner, preferably the day before, or the universal primer weberprim 403 should be applied.
Observe the curing times of the respective base coat.
Coated surfaces such as gypsum plasterboards, solid plasterboards, etc., should be primed with a bonding primer.Grain sizes
15, 2, 3, 4 mmColors
161 on request and for an additional chargeStandard color
Diamant 0010Water requirement
Approximately 6.7 l per 25 kgStorage
Stored in a dry, moisture-protected environment, the material remains storable for up to 1 year.
Mineral render for creating a grain-on-grain textured surface
Application areaweberstar 220 Scheibenputz Jura is an exterior and interior topcoat suitable for applying over weberdur base coats and as a surface coating for webertherm thermal insulation and webertherm lightweight thermal composite systems.Product features
- Free of biocides and preservatives
- Surface-active hydrophilic for balanced moisture management
- Quickly structurable for ceilings and walls
- Creates a healthy indoor climate through optimal water vapor permeability
- Offers high impact resistance in class III according to DIN 4108
- Can be processed mechanically and manuallyGeneral notes
Fresh plaster surfaces should be protected from direct sunlight, strong wind, and moisture exposure.
Application and execution according to DIN 18 350 VOB/C and DIN 18 550.
Consumption figures refer to minimum layer thickness and may vary depending on substrate and application. Exact consumption values should be determined through trial applications on site.
Adjacent building components must be separated from the plaster system.Special notes
Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the plaster color tone may differ from the sample. This does not constitute a quality defect or material complaint.
Color deviations caused by application and drying conditions should be corrected with the weberton 414 AquaBalance leveling paint. This leveling coat should be included in specifications and offers.
When painting AquaBalance plaster systems, colors with AquaBalance technology, e.g., weberton 414 AquaBalance, should also be used.
Material should be ordered for a single object as much as possible; different batches should not be mixed.weberstar 220 AquaBalance
with balanced moisture management offers very high and durable protection against algae and mold growth.
Constantly increased humidity and dirt adherence, e.g., in splash water areas with improper drainage or in planting near facades, can promote algae and mold growth.Substrate preparation
The substrate must be load-bearing, dry, and free of dust and substances that reduce adhesion.
The base coat must be level.
Depending on weather conditions, the base coat should be applied in a timely manner, preferably the day before, or the universal primer weberprim 403 should be applied.
Observe the curing times of the respective base coat.
Coated surfaces such as gypsum plasterboards, solid plasterboards, etc., should be primed with a bonding primer.Grain sizes
15, 2, 3, 4 mmColors
161 on request and for an additional chargeStandard color
Diamant 0010Water requirement
Approximately 6.7 l per 25 kgStorage
Stored in a dry, moisture-protected environment, the material remains storable for up to 1 year.
Consumption and coverage | |
|---|---|
| 15 mm grain size | ca. 23 kg/m² for approx. 109 m² per 25 kg |
| 2 mm grain size | ca. 30 kg/m² for approx. 83 m² per 25 kg |
| 3 mm grain size | ca. 37 kg/m² for approx. 68 m² per 25 kg |
| 4 mm grain size | ca. 50 kg/m² for approx. 50 m² per 25 kg |
Safety Data Sheet
| Download Safety Data Sheet |
| Revised by supplier on 13.05.2014 |
Work safety and storage
| Hazard statements |
| H315 - Causes skin irritation |
| H318 - Causes serious eye damage |
| H335 - May cause respiratory irritation |
| Precautionary statements |
| P101 - If medical advice is needed, keep container or label available |
| P102 - Keep out of reach of children |
| P103 - Read label before use |
| P280 - Wear protective gloves, protective clothing, eye protection, face protection |
| P302 + P352 - IF ON SKIN: Wash with plenty of water |
| P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. |
| P310 - Immediately call a POISON CENTER or doctor |
| P362 - Take off contaminated clothing |
| P501 - Dispose of contents/container in accordance with local regulations |
Classification
| Storage class | 13 |
| Non-combustible solids | |
| Water hazard class | 1 (slightly water hazardous) |
GHS hazard pictograms
- GHS07 - Health hazard
- GHS05 - Corrosive
- Color: colored
- Container: 2-3 hoursBag
- Surface weight: Mineral plaster
- Grains: 1.5 mm2 mm3 mm4 mm
- Standing height: Wide plank
- Clothing size: P II
- Item weight: 25,00 kg
- Content: 25,00 kg
- GoogleShopping: Hauptsortiment
