24x PCI Lastogum Waterproofing 25kg Gray

PCI Lastogum Waterproof, Flexible Protective Layer Under Ceramic Coverings in Shower and Bathroom

Application Areas:

• Liquid membrane waterproofing suitable for roller, brush, or trowel application
• For interior use
• For walls and floors
• In non-building authority regulated areas according to ZDBMerkblatt Bonded Waterproofing, for moisture exposure class A 0
• Exposure class A wall according to the principles of testing for the issuance of a general building authority approval
• Usable up to exposure class W4 according to ÖNorm B 3407
• For wet areas with non-penetrating water, such as bathrooms, residential showers, hotels, nursing homes, and hospitals
• On moisture-sensitive, absorbent substrates, e.g., gypsum plasters, gypsum boards, fiber gypsum boards, drywall panels e.g., Rigips, wood chipboards, anhydrite screeds in moist and wet room areas with typical household use
• On mineral absorbent substrates, e.g., concrete, screed, cement plaster, aerated concrete, cement-based wall fillers such as PCI Pericret or PCI Nanocret FC, and self-leveling compensating compounds, e.g., PCI Periplan fine and PCI Periplan

Product Properties:

• Waterproof, protects moisture-sensitive substrates
• Flexible, compensates for stresses, substrate deformations, temperature fluctuations, and vibrations
• Crack-bridging, high safety even with subsequent substrate cracks
• Ready to use, easy to process by rolling, brushing, or troweling
• Two-colored, facilitates visual layer thickness control
• Limewater resistant, ensures adhesion between protective layer and adhesive mortar during continuous moistening of the adhesive bed
• Free of solvents, environmentally friendly, and safe to handle
• Meets the principles of testing for the issuance of a general building authority approval for bonded waterproofing in conjunction with PCI Carraflex, PCI Carraflott NT, PCI Carralight, PCI Carrament, PCI Flexmörtel S1, PCI Flexmörtel S1 Rapid, PCI FT Rapid, PCI FTExtra, PCI FTFlex, PCI Nanolight, PCI Nanoflott light, PCI Rapidflott, PCI Rapidlight, PCI Nanolight White

Material Basis: Solvent-free synthetic resin dispersion
Components: One-component
Density: approx. 1.5 g/cm
Control Color: White or gray
Coverage: One 8 kg bucket covers approx. 7 m
Processing Temperature: 5°C to 25°C substrate temperature
Drying Time After 1 Coat: approx. 1 hour
Drying Time After 2 Coats: approx. 12 hours, subsequently tileable