Go to the consent manager Skip to main content Skip to search Skip to navigation Jump to footer
42x weberstar 240 AquaBalance
  • biocide-free
  • preservative-free
  • mineral-based
  • water vapor permeable
  • hydrophilic
  • Information on product safety Manufacturer EU Responsible Person

    Grain sizes
    1.004,29 €
    0,96 € per 1 kg
    incl. 19% VAT , plus shipping costs
    Available immediately

    Pallet(s)

    This item has variations. Please select the requested variation.

    0,96 € per 1 kg

    weberstar 240 3mm Grain 25kg Mineral Mineral Render Munich Roughcast


    Mineral mineral render for creating a decorative surface with a timeless, rustic groove structure

    Application area:
    weberstar 240 Munich Roughcast is an exterior render for roughening and interior use on weberdur base renders as well as a topcoat for webertherm insulation and webertherm thermal insulation composite systems

    Product description:
    weberstar 240 is a factory-produced, mineral dry mortar according to DIN EN 998-1

    Composition:
    White cement, white lime hydrate, graded mineral aggregates, hydrophobic agent, additives for improved processing and adhesion to the substrate, lime, cement, and lightfast pigments

    Product properties:

    • Creates a healthy living climate through optimal water vapor permeability
    • Offers the high impact rain protection of exposure class III according to DIN 4108
    • Can be processed mechanically and manually
    Compressive strength 1.5 N/mm2
    Water absorption coefficient w DIN 18550< 0.5 kg/m2·vh
    Water vapor diffusion coefficient micro; DIN EN 998-120
    Water vapor diffusion equivalent air layer thickness sd DIN EN ISO 7738< 0.1 m
    Category of capillary water absorption DIN EN 998-1W 1
    Category of compressive strength DIN EN 998-1CS II
    Mortar group DIN 18550P II
    Fire behavior EN 13501-1A1

    Grain sizes: 2 mm
    Standard color: Diamant 0010
    Colors: 161 On request
    Water requirement: approx. 6.25 l / 25 kg
    Storage: When stored in a dry, moisture-protected place, the material is shelf-stable for up to 1 year

    Consumption / Coverage:

    2 mm grain size :ca. 3.2 kg/m2
    3 mm grain size :ca. 3.5 kg/m2
    5 mm grain size :ca. 4.6 kg/m2

    Substrate preparation:

    • The substrate must be load-bearing, dry, and free of dust and substances that reduce adhesion
    • The base render must be flush and even
    • Depending on weather conditions, the base render may need to be pre-roughened or the universal primer weberprim 403 applied
    • Observe the stand times of the respective substrate


    Processing:

    • During processing and drying, the temperature of the air, the materials used, and the substrate must not fall below 5°C
    • No additives should be mixed into the mortar

    Machine processing: The mortar can be processed with all common plastering machines, see equipment planner
    Hand processing: Thoroughly mix the contents of a bag with the specified amount of water until a workable consistency is achieved

    • Apply the mortar to the substrate and smooth with a trowel to the desired grain size
    • Texture the applied material with a plastic trowel, wooden disc, or PUBrett to achieve the desired surface
    • To avoid color differences and joint lines, do not work with different tools, work wet-in-wet, and do not rework fresh surfaces. To prevent tool marks, work in offset layers

    Safety Data Sheet

    Safety Data Sheet PDF
    01.04.2015

    Work safety and storage

    H315
    Causes skin irritation
    H318
    Causes serious eye damage
    H335
    May cause respiratory irritation
    P101
    If medical advice is needed, keep the container or label available
    P102
    Keep out of reach of children
    P103
    Read the label before use
    P280
    Wear protective gloves/protective clothing/eye protection/face protection
    P302P352
    IF ON SKIN: Wash with plenty of soap and water
    P305P351P338
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
    P310
    Immediately call a poison center/doctor
    P362
    Take off contaminated clothing
    P501
    Dispose of contents/container in accordance with local regulations
    13
    Non-combustible solids
    1 Slightly water hazardous

    Hazards

    Danger
    Warning, irritant
    GHS05 Corrosive, irritant
    Health hazard
    GHS07 Health hazard

    Ingredients

    CAS NumberAbsorption basisSubstance name
    65997151
    1305620

    Product safety information
    Manufacturer information:
    Saint-Gobain Weber GmbH
    Schanzenstraße 84
    Nordrhein-Westfalen
    Düsseldorf, Deutschland, 40549
    info@sg-weber.de
    https://www.sg-weber.de
    Responsible person:
    Saint-Gobain Weber GmbH
    Schanzenstraße 84
    Nordrhein-Westfalen
    Düsseldorf, Deutschland, 40549
    info@sg-weber.de
    https://www.sg-weber.de

    Technisches Datenblatt:

    Sicherheitsdatenblatt:

    Write the first review for this item and help others make a purchase decision!:

    Contact data
    All fields marked with * are mandatory.
    Question about item

    Please see our privacy notice

    Loading ...