ARDEX X 7 G Plus Flexible Tile Adhesive 25 kg Bag

ARDEX X 7 G Plus Flexible Tile Adhesive

Product Description:

• Cement-based
• Meets C2 requirements according to EN 12004
• Flexible
• Waterproof
• Frost-resistant
• Application and installation of ceramic coverings, concrete stone, and moisture-insensitive natural stone slabs indoors and outdoors
• Installation of fine stoneware tiles
• Easy and smooth to process
• High yield
• High stability
• Long processing time
• Wide range of applications

Application Area:

• Indoor and outdoor wall and floor
• Application and installation of
  • Tiles made of stoneware and porcelain
  • Mosaic made of glass and porcelain
  • Concrete stone slabs and moisture-insensitive natural stone slabs
  • Fine stoneware tiles
• Application of
  • Suitable construction boards, e.g., gypsum board
  • Insulation boards made of rigid foam and mineral fibers
  • Tile elements with foam insulation boards with both sides mortar coating
• Tiling on heated screeds
• Tile installation in swimming pools
• Adhesion of ceiling visible and soundproofing panels

Technical Information:
Mixing ratio: approx. 10.5 l water: 25 kg powder accordingly

• approx. 1 RT water: 2 1/4 RT powder

Fresh weight: approx. 1.4 kg/l
Open time: approx. 10 min measured on fresh mortar
Correction time at 20°C: 15 – 20 min
Grouting at 20°C: after approx. 8 hours
Floor heating suitability: yes
GISCODE: ZP 1 cement-containing product, low chromate
Storage: in dry rooms for approx. 12 months in the original sealed container
Bulk density: approx. 1.3 kg/l
Material requirement: On smooth substrates:

• approx. 1.0 kg/m² powder with trowel notch 3 x 3 x 3 mm
• approx. 1.6 kg/m² powder with trowel notch 6 x 6 x 6 mm
• approx. 2.2 kg/m² powder with trowel notch 8 x 8 x 8 mm

Verarbeitungszeit at 20°C: approx. 5 hours
Walkability at 20°C: after sufficient drying or curing, approx. 24 hours, then grouting on the floor possible