Beko Allcon 10 Construction Adhesive with High Bond Strength including 1 Pair of Disposable Gloves
Weather-resistant according to DIN EN 204 D4. Test report available. Bonds nearly all materials in a one-component system. Easy handling, solvent-free, silicone-free, aging-resistant, resistant to many chemicals, frost-proof, high final strength, suitable for natural stone.
Processing advantages
- Processing with common cartridge guns, ready for load after approximately 7 to 10 minutes, replaces many other adhesives and glues, always have the right product on hand.
- Safety in application: opened cartridge lasts about 10 months, unopened about 18 months.
- Good dosing, paintable and overcoatable, suitable for indoor and outdoor use.
Application areas
Bonding of wood, chipboard, fiberboard, MDF, coated panels, metals, aluminum, natural and artificial stone, concrete, marble, ceramics, plastics, plasterboards, foam, EPS, hard foam, acrylic insulation, and much more.
Approximate joint width: 3 mm. Allcon10, 24 hours for surface bonding, becomes load-bearing after 7 to 10 minutes at about 70%, and fully cured after 30 to 45 minutes at 100%.
Base: Polyurethane, moisture-curing. Tested, test report according to DIN EN 204 D4, water-resistant bonding according to WATT 91 80°C. Odor: mild. Shelf life in opened condition: about 10 months, unopened: about 1 ½ years. Skin formation time: approx. 3 minutes at normal climate. Storage: dry, at room temperature. Gap bridging: approx. 10 cm. Temperature resistant from -40°C to 80°C, short-term up to 120°C. Usable from 5°C to max. 40°C. Viscosity: paste.
Note
Persons already sensitized to diisocyanates should handle this product with caution as allergic reactions may occur. Avoid skin contact with the product if you have asthma, eczema, or skin problems.
Do not use the product in poorly ventilated areas or with a gas filter mask of type A1 according to EN 14387.
Safety Data Sheet
| Safety Data Sheet | |
|---|---|
| Sicherheitsdatenblatt.pdf | |
| 28.07.2014 |
Workplace Safety and Storage
Contains isocyanates, which can cause allergic reactions. Causes skin irritation. May cause allergic skin reactions. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. Provide the specific exposure route if confirmed that this hazard exists only via that route. May damage organs through prolonged or repeated exposure. Specify affected organs and exposure route if confirmed that this hazard exists only via that route. | |
If medical advice is needed, keep the container or label available. Keep out of reach of children. Read all safety instructions before use. Do not breathe dust, fumes, gas, mist, spray, or aerosol. Wash thoroughly after handling. Use only outdoors or in well-ventilated areas. Contaminated work clothing should not be removed from the workplace. Wear protective gloves, protective clothing, eye protection, and face protection. Use respiratory protection if ventilation is inadequate. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Seek medical advice if needed. If skin irritation occurs, seek medical advice. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Store contents in a well-ventilated, upright, tightly closed container. | |
1 Flammable liquids, flash point > 60°C | |
| 1, slightly water hazardous |
Hazards
| Danger | |||||||||||||||||||
 | |||||||||||||||||||
| GHS08 | |||||||||||||||||||
|
- Container: Cartridge
- Item weight: 0,55 kg
- Content: 0,31 l
- GoogleShopping: Prio-Artikel
