KNAUF Goldband Ready-mixed Plaster Gypsum 30 kg

KNAUF Goldband Ready-Mix Gypsum 30 kg

Goldband is a ready-mixed plaster based on gypsum with special lightweight aggregates, designed for interior plastering. Suitable for single-layer manual application on all rough plaster substrates and hardened or reinforced solid base coats. It can be used in all room volumes with normal humidity, including rooms with high moisture levels such as kitchens and bathrooms (DIN 18550 Part 2, Section 4.11).

Properties

• B4202 according to DIN EN 13279-1
• Especially lightweight and economical
• Surface can be textured or smoothed
• Creates a comfortable and healthy indoor climate
• Moisture-regulating and vapor-permeable
• Effective in fire protection
• Resistant to abrasion and nails
• Application thickness up to 50 mm
• Suitable for manual application

Application Area

Knauf Goldband is used for creating smooth, textured, or scraped surfaces on interior walls. It serves as a base plaster for all types of masonry and load-bearing plaster substrates. Suitable for use from basement to roof in all rooms with typical humidity levels, including kitchens and bathrooms with household use, e.g., toilets in schools, hotel and hospital bathrooms, and care homes.

It is also used for producing surface finishes in quality levels Q1 to Q4, smoothed and Q1 to Q3 scraped, Q4 smoothed in conjunction with Knauf Multifinish or Readygips. Refer to the leaflet "Interior Wall Finishes" issued by the Industry Group for Gypsum Plasters of the Federal Association of Gypsum Industry and the Federal Association for Interior and Facade Construction of the Central Association of German Construction Industry.

Substrate

• For subsequent paints or wallpapers
• As a tile substrate
• As a base for surface plaster

Execution

To produce smoothed surfaces, apply the material with a trowel or plastering board, distributing it evenly with a trowel or float. After initial setting, smooth with a trapezoidal float and align corners. If necessary, rework with a plastering spatula. After moistening the surface with a sponge disc to create a matte finish and level small irregularities, allow the plaster to partially set, then smooth with a plastering spatula or trowel.

Preparation

Ideal for renovation or small areas. We differentiate between bonding plaster with special adhesion properties and ready-mixed plaster for masonry. Both materials are supplied in bags and are manually applied.

Plaster Application

After mixing, apply the mortar with a trowel or pull it on with a plastering board, ensuring full adhesion by pressing firmly against the substrate. Subsequently, level the plaster with a trowel or float, distributing it evenly and flush.

Finishing

As the plaster stiffens, it may be smoothed with a trowel or float, closing pores and small imperfections. For creating a smoothed surface, the plaster is then worked with a plastering spatula or float. If a textured or ceramic tile finish is desired, the surface should only be scraped.

Surface Finishing

Once the plaster begins to stiffen, it can be smoothed with a trowel or float, sealing pores and small defects. The surface can then be textured or left smooth, depending on the desired finish.

Safety Data Sheet
Datenblatt	Sicherheitsdatenblatt.pdf
Vom Lieferant überarbeitet am	22.04.2015
Work Safety and Storage
HS	GHS
H318	Causes serious eye damage
PS	Please observe section 22 of the safety data sheet
Storage Class	13
Water Hazard Class	1 (slightly water hazardous)
Hazards
Signal Word	Danger
GHS Pictogram
Ingredients
CAS Number Intake Route Substance Name 1305620 7778189