Wood Protection Oil Stain Paint
Priming and stain in one coat, the innovative long-term protection based on oil!
Transparent, silk-matte wood coating based on natural oil for all wood in outdoor areas. Open-pored, allows the wood to breathe, and reduces swelling and shrinking. Water-repellent, weather-resistant, and UV-resistant. Does not peel, flake, or crack off without sanding; simply overcoat; a primer is not necessary. Light and seamless application; dries during brushing process without sticking. Contains active ingredients for the protection of the coating against mold, algae, and fungal infestation, and has been proven effective under extreme climate conditions for decades.
Advantages:
- Priming and stain in one coat
- Water-repellent and weather- and UV-resistant
- Open-pored and breathable surface
- Coating is protected against mold, algae, and fungal infestation
- Container sizes: 0.75 l; 2.50 l; 25 l
- 1 liter covers approximately 26 m for one coat
Application areas:
Osmo Holzschutz ÖlLasur is ideal for all wood in outdoor areas: doors, windows, and window shutters, large components, carports, wooden facades, balconies, wooden terraces, fences, pergolas, garden furniture, and garden houses, as well as non-structural components.
Shelf life:
5 years or longer if stored dry and tightly sealed. If it has become viscous due to frost, store at room temperature for 24-36 hours before use.
Preparation:
The wood surface must be clean, dry, and frost-free, with a maximum moisture content of 20%. Osmo Holzschutz ÖlLasur is ready to use, do not dilute. Mix thoroughly. If possible, apply the first coat before assembly all around the wood. Thoroughly clean old open-pored coatings. Old paint and varnish coatings must be completely removed. Always wear a dust mask when sanding. The coating result depends on the wood quality; therefore, especially on unknown substrates, a test coat is recommended. If additional protection against rot, blue stain, or insect infestation is desired, the wood should be coated all around with Osmo HolzImprauml;gnierung WR beforehand.
Processing:
Apply with Osmo brush or microfiber roller along the wood grain and thoroughly coat. Allow approximately 4-6 hours to dry in well-ventilated areas. Then apply a second coat. For renovation, usually only one coat on the cleaned surface is sufficient.
Colors
- No 700 Pine
- No 702 Larch
- No 703 Mahogany
- No 706 Oak
- No 707 Walnut
- No 708 Teak
- No 710 Pine
- No 712 Ebony
- No 727 Rosewood
- No 728 Cedar
- No 729 Tannin Green
- No 731 Oregon Pine
- No 732 Light Oak
- No 900 White
- No 903 Basalt Gray
- No 905 Patina
- No 906 Pearl Gray
- No 907 Quartz Gray
Safety Data Sheet | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Safety Data Sheet PDF | |||||||||
| 14.05.2018 | |||||||||
Work Safety and Storage | |||||||||
H412 Harmful to aquatic life with long-lasting effects | |||||||||
P101 If medical advice is needed, keep container or label at hand P102 Keep out of reach of children P262 Do not get in eyes, on skin, or on clothing P271 Use only outdoors or in well-ventilated areas P273 Avoid release to the environment P501 Dispose of contents/container in accordance with local regulations | |||||||||
| 2 water hazard | |||||||||
Ingredients | |||||||||
| |||||||||
Affhüppen Esch 12
Warendorf, Deutschland, 48231
info@osmo.de
www.osmo.de
Affhüppen Esch 12
Baden-Württemberg
Warendorf, Deutschland, 48231
info@osmo.de
https://www.osmo.de
- Container: Can
- Item weight: 1,10 kg
- Content: 0,75 l
- GoogleShopping: Hauptsortiment
