PCI Gisogrund 303 Spezialhaftgrundierung 20 l Eimer

PCI Gisogrund 303 Special Primer on smooth, non-absorbent substrates

Product features:

• Low odor, solvent-free according to TRGS 610; Giscode D 1
• Very low emissions PLUS, GEVEMICODE EC 1 PLUS
• EU 2004/42/IIAg50/30:
• Quick reworkable, bond-free after approx. 30 to 45 minutes
• Ready to use, can be applied without mixing, with optimized workability in roller and brush application
• High bond strength, secure adhesion of subsequent coverings
• Water-resistant, can be directly tiled with tiles if no sealing is required, under moderate moisture exposure
• Control color light yellow, the primed surface is easily recognizable
• EMICODE: EC 1 PLUS

Colors: light yellow transparent
Delivery forms: 20l bucket / 5l bucket / 1l stand-up bag

Application area:

• For interior and exterior use
• For walls and floors
• For priming dense, non-absorbent coverings such as terrazzo, ceramic tiles and slabs, glazed bricks, natural stones and artificial stones, substrates with adhesive residues, as well as asphalt slabs or firmly adhering and ground PVC coverings
• Before laying ceramic tiles and slabs with PCI tile adhesives, such as PCI FT adhesive mortar, PCI Flexmörtel, PCI Flexmörtel Schnell, PCI Nanolight, PCI Rapidlight, etc.
• Before plastering with PCI Polycret 5 concrete filler and PCI Pericret

Substrate preparation:
The substrate must be firm, crack-free, clean, and dry. Oil, old coatings, and other residues, such as solvent-based and water-soluble adhesive residues, must be completely removed.

Processing of PCI Gisogrund 303:
When processing PCI Gisogrund 303, wear safety glasses and protective gloves.

Thoroughly stir or shake PCI Gisogrund 303 before use.
Apply primer with a brush, soft-haired broom, or roller on the substrate and apply in a crisscross pattern, thinly. Avoid puddling! Consumption: approx. 90 to 130 ml/m².
Apply PCI Polycret 5 or PCI Pericret or PCI tile adhesive to the primed and dried surface for laying ceramic tiles and slabs.