PCI Nanolight Tile Adhesive 15 kg

PCI Nanolight Tile Adhesive 15 kg variable flexible mortar tile adhesive with nanotechnology low stress low dust

Product features

• With a unique lightweight filler combination and nanotechnology
• High yield due to the use of special additives and a unique lightweight filler combination
• Plastic and flexible mortar that can be easily applied with a trowel or spatula
• Low stress, durable, the mortar layer can be applied up to a thickness of 15 mm in a single layer or in the medium bed process
• High stability, enabling simple and quick work
• Deformation capable, compensates for stresses caused by temperature fluctuations in the substrate
• Low dust, less dust generation when opening and pouring out
• Very low emissions, GEV EMICODE EC1 PLUS R
• Chromate-reduced
• Complies with the guidelines for flexible mortar of the German Construction Chemistry e.V.
• C2 TE S1 according to DIN EN 12004
• Meets the requirements for a general building authority test certificate for bonded waterproofing in conjunction with PCI bonded waterproofing systems such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K, PCI Apoflex FW, and PCI Pecilastic W

Color gray

Application areas

• For interior and exterior use
• For wall and floor applications
• Suitable for all substrates including cement screeds, ground anhydrite or gypsum screeds, concrete, precast concrete elements, aerated concrete, heated screeds, plasterboard, fiber-reinforced plaster, dry screeds, magnesite screeds, gussasphalt (interior only), insulation boards, gypsum panels, gypsum plasters, cement and lime-cement plasters, masonry, old ceramics, and flat load-bearing wooden substrates such as chipboard, OSB boards, etc., metal substrates (interior only), firmly adhering PVC coverings
• Suitable for all ceramic coverings in thin-bed or medium-bed processes, including stoneware, porcelain tiles, fine stoneware, porcelain mosaics, glass mosaics, glass tiles, brick tiles, and Cotto
• For laying tiles and slabs on foam elements PCI Pecidur, on impact sound insulation and decoupling plates PCI Polysilent, as well as on waterproofing and decoupling membranes PCI Pecilastic
• For laying tiles and slabs on bonded waterproofing systems PCI Lastogum (e.g., private bathrooms), PCI Seccoral (e.g., swimming pools and terraces), or PCI Apoflex (e.g., large-format tiles)
• For repairing and leveling uneven wall and floor surfaces, e.g., masonry, cement plaster, screed before laying tiles and slabs

Safety Data Sheet
Datenblatt	Sicherheitsdatenblatt.pdf
Vom Lieferant überarbeitet am	17.01.2017
Gefahr
Arbeitsschutz und Lagerung
H-Sätze GHS
H315 Verursacht Hautreizungen
H318 Verursacht schwere Augenschäden
H335 Kann die Atemwege reizen
P-Sätze
P102 Darf nicht in die Hände von Kindern gelangen
P261 Einatmen von Staub, Rauch, Gas, Nebel, Dampf, Aerosol vermeiden
P264 Nach Gebrauch gründlich waschen
P280 Schutzhandschuhe, Schutzkleidung, Augenschutz, Gesichtsschutz tragen
P302+P352 BEI BERÜHRUNG MIT DER HAUT mit viel Wasser waschen
P304+P340 BEI EINATMEN Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen
P315 Sofort ärztlichen Rat einholen
P332+P313 Bei Hautreizung ärztlichen Rat einholen
P362+P364 Kontaminierte Kleidung ausziehen und vor erneutem Tragen waschen
P501 Inhalt in Behälter entsprechend den Vorschriften entsorgen
Lagerklassen
Wassergefährdungsklasse	1, schwach wassergefährdend
Gefahren
Signalwort	Gefahr
GHS Piktogramme
Inhaltsstoffe
CAS-Nummer Aufnahmegrund Stoffname 544172 Siliciumdioxid 65997151 Calciumaluminat