SchluterQUADEC
Application and Function
SchluterQUADEC is a high-quality finishing profile for wall corner joints on tile coverings and provides effective edge protection. The visible surface of the profile forms a right-angled external corner of the tile covering.
The integrated joint bar in the aluminum profiles creates a defined joint chamber in front of the tile.
The profiles, available in various materials, colors, and surface finishes, allow for matching the edge colors of the covering to the tile and grout colors or creating interesting contrasts for decorative purposes. SchluterQUADEC and –A harmonize well with the border profiles SchluterQUADECFS or SchluterDESIGNLINE. In addition to their decorative effect, the profiles effectively protect the tile edges in the area from damage caused by mechanical impacts.
SchluterQUADEC made of stainless steel is particularly durable as an edge protector and can also be used as a floor edge, decorative inlay in the floor area, or stair edge.
Similarly, SchluterQUADEC can be used to create edges, corners, or skirting board covers on other covering materials such as carpet, parquet, natural stone tiles, or epoxy resin screeds. Suitable profiles are available for easy and neat connection of SchluterQUADEC profiles at interior and exterior corners.
For simple and neat connections of SchluterQUADEC profiles at interior and exterior corners, suitable corner pieces as well as connectors and end caps for selected materials are available.
Processing
- Select SchluterQUADEC according to the tile height.
- Apply tile adhesive with a notched trowel where the tile covering is to be limited. When processing SchluterQUADEC at an external wall corner, first tile the first wall, then apply tile adhesive in the corner area of the second wall.
- Press the perforated mounting leg of the profile into the adhesive bed and align it.
- Fill the perforated mounting leg completely with tile adhesive and fill the open profile chamber with tile adhesive.
- Press the adjacent tiles firmly and align them so that the top edge of the profile is flush. The tiles must be fully bedded in the profile area.
- The tile is placed against the side joint bar, ensuring an even joint of 1.5 mm. For stainless steel profiles, leave a joint of approximately 1.5 mm. Completely fill the joint space between the tile and the profile with joint mortar.
- Process sensitive surfaces with materials and tools that do not cause scratches or damage. Remove dirt caused by mortar or tile adhesive immediately.
- Suitable corner pieces are available for interior and exterior corners.
- GoogleShopping: Hauptsortiment