Plaster and Masonry Binder MC 5
Application and Properties
- Binding agent for the production of pull plaster and masonry mortar
- Floor stabilization and solidification
- Production of delayed-setting fresh mortar
- Compressive strength class 5 15 MPa
- By adding an air pore former, an air pore volume of max 20 is achieved
Quality Control
Our binding agent is subject to in-house production control and external monitoring by the VDZ
Application
Spenner Plaster and Masonry Binder MC 5 is suitable for the production of normal masonry mortar and plasters in interior and exterior areas
Substrate Preparation
The substrate must be solid, load-bearing, absorbent, and free of dust, dirt, efflorescence, and other residues such as separating agents that could impair adhesion. If necessary, the substrate should be cleaned, and loose components removed. For highly absorbent stones or substrates, premature water removal through pre-wetting or other suitable measures should be prevented
Processing
When processing the binding agent, the rules of technology must be observed, such as adequate curing to protect against drying out and freezing. Do not process below 5°C and above 30°C material, substrate, and air temperature.
Industriestraße 61
Finnentrop, Deutschland, 57413
info@spenner-zement.de
www.spenner-zement.de
Industriestraße 61
Baden-Württemberg
Finnentrop, Deutschland, 57413
info@spenner-zement.de
https://www.spenner-zement.de
