Go to the consent manager Skip to main content Skip to search Skip to navigation Jump to footer
weberdur 120 mineral cement plaster 30kg
Mineral cement plaster for the creation of highly durable wall surfaces

Mit dem Bauschnell ChatGPT Assistent chatten

Information on product safety Manufacturer EU Responsible Person

Quantity
from 9,90 €
0,33 € per 1 kg
incl. 19% VAT , plus shipping costs
Available immediately
Bag(s)

This item has variations. Please select the requested variation.

0,33 € per 1 kg

weberdur 120 Cement Plaster 1mm 30kg natural gray

Mineral cement plaster for the preparation of highly stressed plaster surfaces

  • Substrate
    Weakly absorbent substrate, smooth non-absorbent substrate

Grain sizes
Approximately 1 - max 2 mm

Color tone
Natural gray

Application thickness
10 mm to 20 mm

Water requirement
Approximately 55 l per 30 kg

Storage
When stored in a dry, moisture-protected environment, the material is storable for up to 1 year

Application area

weberdur 120 is used indoors and outdoors on masonry according to DIN 1053. it is particularly suitable for permanent wet areas, e.g., building base or walls in the ground, or walls exposed to high mechanical stress, as well as as a backing layer for waterproofing. For use in swimming pool areas, we recommend the weberplan 819 leveling compound.

Product features

  • Weather and frost resistant
  • Water-repellent
  • Mechanically highly durable

General notes

  • Mortar must not contain any additives.
  • During processing and drying, the temperature of the air, materials, and substrate must not fall below 5 °C.
  • Fresh plaster surfaces must be protected from direct sunlight, strong wind, or moisture exposure.
  • Application and execution according to DIN 18 350 VOB and DIN 18 550.
  • Consumption figures refer to the minimum layer thickness and may vary depending on substrate and processing. Exact consumption values should be determined through trial plastering on the site.
  • Adjacent components must be separated from the plaster system.
  • Sinter skin must be removed before applying additional layers.

Special notes

The mortar is not suitable for insulating masonry.

Safety Data Sheet

Sicherheitsdatenblatt

Sicherheitsdatenblatt.pdf
04.03.2015

Arbeitsschutz und Lagerung

H315

Verursacht Hautreizungen

H318

Verursacht schwere Augenschäden

H335

Kann die Atemwege reizen
Bitte Abschnitt 22 des Sicherheitsdatenblattes beachten

P101

Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten

P102

Darf nicht in die Hände von Kindern gelangen

P103

Vor Gebrauch Kennzeichnungsetikett lesen

P280

Schutzhandschuhe, Schutzkleidung, Augenschutz, Gesichtsschutz tragen

P302+P352

BEI BERÜHRUNG MIT DER HAUT mit viel Wasser waschen

P305+P351+P338

BEI KONTAKT MIT DEN AUGEN einige Minuten lang behutsam mit Wasser spülen, eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen, weiter spülen

P310

Sofort GIFTINFORMATIONSZENTRUM, Arzt anrufen

P362

Kontaminierte Kleidung ausziehen

P501

Inhalt in Behälter zuführen
13
Nicht brennbare Feststoffe
schwach wassergefährdend

Gefahren

Gefahr
GHS07
GHS07
GHS05
GHS05

Inhaltsstoffe

CAS NumberIntake routeSubstance name
65997-15-1Portland cement
130562-0Silica sand

Technisches Datenblatt:

Sicherheitsdatenblatt:

Write the first review for this item and help others make a purchase decision!:

Contact data
All fields marked with * are mandatory.
Question about item

Please see our privacy notice

Loading ...