webertec Superflex D2 Flex Sealant 2K 24kg weberprim 900 Universal Primer 10L

webertec Superflex D2 Flexible Sealant Rods 2K Sealing Flexible Sealant 24kg

Attention: Before applying Superflex D2, the substrate must be primed with weberprim 801. weberprim 801 is undiluted and should be mixed with water in a ratio of 1:1 at room temperature. After drying, scratch coating is applied, followed by the coating.

Highly flexible, reactive, and fast-curing sealing rods.

Application area:
- For flexible sealing of basement exterior walls, plinths, and foundations wall/ground
- For subsequent interior sealing
- Negative sealing
- For sealing containers indoors up to 10 m water column
- As a primer and adhesion bridge under PMBC, to create horizontal barriers in and under rising walls, and as an adhesion bridge on existing bitumen coatings
- For sealing in conjunction with ceramic coverings, e.g., swimming pools, wet, and moist rooms

Product description:
webertec Superflex D 2 is a two-component, fast-curing flexible sealant with general building authority approval MDS according to DIN 18533.

Composition:
Cement, selected quartz sands, highly reactive polymers, reactive fillers, additives.

Product properties:

• Fast-curing
• Reworkable after 90 minutes in wall areas
• Walkable after 4 hours, tileable
• Weather-independent drying within 24 hours
• Dry residue > 95%
• Crack bridging > 1 mm
• Suitable for all mineral substrates, no plaster layer required on masonry
• Overcoatable, paintable, frost/ salt resistant, UV resistant
• Durably water submersible after 3 days
• Sprayable with peristaltic pump technology and screw pump technology, e.g., Wagner PC 1030 with air support

Processing temperature: 3 °C to 30 °C air and object temperature
Density: approx. 1.05 kg/dm³ of the finished mixture
Consistency: sealant, brush, spatula, sprayable
Processing time: approx. 45 minutes
Cleaning: with water while fresh
Application tools: mason's trowel, float, roller, spray machine
Color: gray
Drying time: approx. 24 hours
Storage: In a dry, frost-free environment in the original sealed container, the material remains usable for at least 12 months

Consumption / Coverage

Substrate preparation:

• The substrate must be frost-free, solid, clean, sufficiently dry, and free from tar pitch, nests, and open cracks, as well as ridges and other contaminants.
• Remove water-repellent, adhesion-reducing residues.
• Breach edges, round corners.
• Joints and depressions > 5 mm are to be sealed with webertec 933 filling mortar.
• Chamfers at the floor-wall connection are to be rounded with webertec 933, radius 5 cm.
• Suction substrates must be pre-treated with weberprim 801.

Processing

Mixing process:

• Mix ratio: A and B component in a ratio of 1:1 by weight, knead thoroughly. Mixing time: approx. 2 to 3 minutes. Mixing equipment: high-performance drill with paddle or weberSys paddle No. 3.

Scratch coating:

• To close pores and cavities and open joints up to 5 mm wide, apply a full-surface scratch coat of webertec Superflex D 2, mixed with weberSys hard quartz 0.1 to 0.3 mm in a ratio of 3:1 by volume, according to room size. The scratch coat must not be damaged by the subsequent sealing layer.

Sheet sealing:

• In at least 2, possibly 3 work passes, each with full coverage. Material application approx. 1.10 kg/m² per mm dry film thickness. The coating must have the necessary total thickness at every point for the expected water load. The second and third layers are applied when the previous sealing layer can no longer be damaged during application.

weberprim 900 Universal Primer

• 5 / 10 liter canister
• Improves adhesion to the substrate
• Ready to use
• Solvent-free
• Alkali resistant, solvent-free
• Item number 1702164

weberprim 900 is an alkali-resistant, non-embrittling primer with dust-binding and water-repellent effects. It can be used to pre-treat absorbent substrates, ideal for subsequent cementitious waterproofing. weberprim 900 is very low-emission and suitable for priming porous concrete, mineral plasters, fiber cement boards, concrete, masonry, and cement screeds.

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Revised by supplier on	10.04.2017
Work Safety and Storage
Storage classes	12 Non-flammable liquids not assigned to any of the above storage classes
Water hazard class	1 Slightly water hazardous
Hazards
Additional information	EUH208 Contains: 1,2-Benzisothiazol-3(2H)-one. May cause allergic reactions.

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Revised by supplier on	10.04.2017
Work Safety and Storage
GHS Labels	H315 Causes skin irritation H318 Causes serious eye damage
Phrases	Please observe section 22 of the safety data sheet P101 If medical advice is needed, keep container or label available P102 Keep out of reach of children P103 Read all instructions carefully and follow them P280 Wear protective gloves / protective clothing / eye protection / face protection / hearing protection P302P352 IF ON SKIN: Wash with plenty of water P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER / doctor P362 Take off contaminated clothing P501 Dispose of contents / container in accordance with local regulations
Storage classes	13 Non-flammable solids not assigned to any of the above storage classes
Water hazard class	1 Slightly water hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS Number Basis of Entry Substance Name 13463677 65997151 1314132