webertec Superflex D2 Flex Sealant 2K Waterproofing Flexible Sealant 6kg

webertec Superflex D2 Flexible Sealant Rods 2K Sealing Flexible Sealant 6kg

Attention: Before applying Superflex D2, the substrate must be primed with weberprim 801. weberprim 801 should be undiluted or diluted up to 1:1 RT with water. After drying, the surface should be scratch-coated, followed by the coating.

Highly flexible, reactive, and fast-curing sealing rods

Application area:
- For flexible sealing of basement exterior walls, plinths, and foundations wall/ground
- For subsequent interior sealing
- Negative sealing
- For sealing containers indoors up to 10 m water column
- As a primer and adhesion bridge under PMBC, to create horizontal barriers in and under rising walls, and as an adhesion bridge on existing bituminous coatings
- For sealing in conjunction with ceramic coverings, e.g., swimming pools, wet, and moist rooms

Product description:
webertec Superflex D 2 is a two-component fast-curing flexible sealant with general building authority approval MDS according to DIN 18533

Composition:
Cement, selected quartz sands, highly reactive polymers, reactive fillers, additives

Product properties:

• Fast-curing
• Reworkable after 90 minutes in wall areas
• Walkable after 4 hours, tileable
• Weather-independent drying within 24 hours
• Dry residue > 95%
• Crack bridging > 1 mm
• Suitable for all mineral substrates, no plaster layer required on masonry
• Overcoatable, paintable, frost/ice resistant, UV resistant
• Durably water-submersible after 3 days
• Sprayable with peristaltic pump technology and screw pump technology, e.g., Wagner PC 1030 with air support

Processing temperature: 3°C to 30°C air and object temperature
Density: approx. 1.05 kg/dm³ of the finished mixture
Consistency: sealant, brush, spatula, sprayable
Processing time: approx. 45 minutes
Cleaning: with water while fresh
Application tools: mason's trowel, float, roller, spray machine
Color: gray
Drying time: approx. 24 hours
Storage: In a dry, frost-free storage in the original sealed container, the material remains shelf-stable for at least 12 months

Consumption / Yield:

• The substrate must be frost-free, solid, clean, sufficiently dry, and free from tar pitch, nests, and open cracks, as well as ridges and other contaminants.
• Remove water-repellent, adhesion-reducing residues
• Break edges, round corners
• Joints and depressions > 5 mm are to be sealed with webertec 933 filling plaster
• Fillet welds at the floor-wall connection should be rounded with webertec 933, radius 5 cm
• Suctioning substrates should be pre-treated with weberprim 801

Processing
Mixing process:

• Mixing ratio: A and B component in a ratio of 1:1 by weight, knead thoroughly. Mixing time: approx. 2 to 3 minutes. Mixing equipment: high-performance drill with paddle or weberSys paddle No. 3.

Scratch coating:

• To close pores and cavities and open joints up to 5 mm wide, a full-surface scratch coat of webertec Superflex D 2, mixed with weberSys hard quartz 0.1 to 0.3 mm in a ratio of 3:1 by volume, should be applied according to room parts. The scratch coat must not be damaged by the subsequent sealing application.

Surface sealing:

• In at least 2, possibly 3 work passes, each with full coverage. Material application approx. 1.10 kg/m² per mm dry film thickness. The coating must have the necessary total thickness at every point for the expected water load. The second and third layers are applied when the previous sealing layer can no longer be damaged during application.

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Last revised by supplier on	10042017
Work Safety and Storage
Storage classes	12 Non-flammable liquids not assigned to any of the above storage classes
Water hazard class	1 slightly water hazardous
Hazards
Additional information	EUH208 Contains: 1,2-Benzisothiazol-3(2H)-one. May cause allergic reactions.

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Last revised by supplier on	10042017
Work Safety and Storage
GHS hazard pictograms	H315 Causes skin irritation H318 Causes serious eye damage
Precautionary statements	Please observe section 22 of the safety data sheet P101 If medical advice is needed, keep the container or label available P102 Keep out of reach of children P103 Read all instructions carefully and follow them P280 Wear protective gloves/ clothing/ eye protection/ face protection/ hearing protection P302P352 IF ON SKIN: Wash with plenty of water P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P310 Immediately call a poison center/doctor P362 Contaminated clothing should be removed P501 Dispose of contents/container in accordance with local regulations
Storage classes	13 Non-flammable solids not assigned to any of the above storage classes
Water hazard class	1 slightly water hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS Number Basis for classification Substance name 13463677 65997151 1314132