ACTION PCI Gisogrund Rapid Rapid Primer 10L Expiry Date: 01/25

PCI Gisogrund Rapid Primer; Rapid Primer for cementitious and gypsum-based substrates

MHD: 01/25 Goods excluded from return and warranty

Product features:

• Low odor according to TRGS 610; Giscode D 1
• Very low emissions, GEVEMICODE EC 1
• EU 2004/42/IIAg50/30:
• Very fast film formation, reworkable after 5 minutes on mineral substrates with PCI Fliesenkleber or PCI Spachtelmassen
• Adhesion secure, PCI Fliesenkleber and PCI Spachtelmassen adhere firmly to the surface primed with PCI Gisogrund Rapid
• Protects thin-bed mortar or leveling compound from rapid water loss, extends open time, improves adhesion, and prevents the formation of shrinkage cracks
• Prevents blistering and rapid water loss during substrate leveling with PCI Periplan, PCI Periplan Fein, and PCI Periplan Plus
• Ready to use
• Control color pink, allows good surface control
• Low spray tendency during application
• Complies with the guidelines of the Bundesverband der Gipsbauplatten und Gipsindustrie and DIN 181571

EMICODE: EC 1
Colors: pink
Delivery forms: 10l canister / 5l canister / 1l stand-up bag

Anwendungsbereiche:

• For interior and exterior use
• For walls and floors
• For priming cement and calcium sulfate plasters, concrete, aerated concrete, masonry, mineral renders, construction boards, gypsum panels, plasterboard, and fiber-reinforced gypsum boards as a pre-treatment before laying ceramic coverings
• For priming concrete slabs, cement and calcium sulfate plasters before applying liquid-applied PCI floor leveling compounds such as PCI Periplan or PCI Periplan Fein, as well as stable floor leveling compounds and other hydraulically hardening mortars

Substrate preparation:

The substrate must be firm, clean, and load-bearing. Remove oil stains, adhesion-reducing surfaces, and contaminants thoroughly. Freshly installed cement screeds must not exceed 4 %, and ground anhydrite or gypsum screeds must not exceed 0.5 % residual moisture content, measured with CM device.

Processing:

• PCI Gisofrund Rapid fast primer, rapid primer, tile primer
• Thoroughly shake PCI Gisogrund Rapid before use
• Pour the required amount of PCI Gisogrund Rapid into a suitable application container
• Apply PCI Gisogrund Rapid evenly and thoroughly to the substrate, e.g., with a fine-pored foam roller, avoiding puddling!
• After film formation, the color change and primer will become approximately transparent, and subsequent work can be carried out immediately

Color: pink
Delivery forms: 10l canister / 5l canister / 1l stand-up bag