ACTION PCI Carrafug Joint Mortar No.26 Pearl Gray 5kg Expiry Date: 09/25

PCI Carrafug SpezialFugenmörtel for Natural Stone Tiles

Best before: 09/25 Goods excluded from return and warranty

Product features:

• Crack-free curing, the joint does not crack or spall
• Fast setting, easy to wash out, and walkable after approximately 6 hours, enabling efficient work
• Waterproof and frost-resistant, suitable for indoor and outdoor use
• Widely temperature-independent hardening profile, with the washing time remaining approximately the same at low and high temperatures
• Does not cause edge zone discoloration on sensitive natural stones
• High joint filling degree
• Temperature resistant from 20°C to 80°C
• EMICODE: EC 1 PLUS R

Colors: No 22 sand gray, No 25 Carrara white, No 26 pearl gray, No 27 Jura beige, No 47 anthracite

Delivery forms: 5kg bag

Application areas:

• For indoor and outdoor use
• For wall and floor applications
• For underfloor heating, balconies, and terraces
• For grouting natural stone tiles such as marble, travertine, granite, Solnhofen slabs, etc.
• For joint widths from 1 to 8 mm

Substrate preparation:
Immediately after laying the tiles, scrape and clean the joints evenly to the tile thickness. Allow the adhesive or laying mortar to cure. Do not pre-fill joints before grouting.

Processing of PCI Carrafug:
Pour mixing water into a clean working container. Add PCI Carrafug and stir with a suitable drill or mixing tool attached to a drill until a homogeneous, lump-free mortar is achieved.
After a curing time of approximately 3 minutes, stir again.
Grouting of tiles
Apply PCI Carrafug in the wall and floor areas with a PCI rubber jointing disc, and in the floor area also with a rubber squeegee. Fill the joints completely and, after sufficient setting, perform a finger test with a slightly damp sponge or sponge board.
After drying, remove any remaining mortar residue with a damp sponge.

Safety Data Sheet
Data sheet	Safety Data Sheet PDF
Reviewed by supplier on	05072016
GHS link
Occupational safety and storage
GHS hazard statements	H315 Causes skin irritation H318 Causes serious eye damage H335 May cause respiratory irritation
P statements	Please refer to section 22 of the safety data sheet P102 Keep out of reach of children P261 Avoid inhalation of dust/fumes/gas/mist/vapors/aerosols P264 Wash thoroughly after handling P280 Wear protective gloves/protective clothing/eye protection/face protection P302P352 IF ON SKIN: Wash with plenty of soap and water P304P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P315 Get medical advice/attention immediately P332P313 If skin irritation occurs: Get medical advice/attention P362P364
Storage classes	13 Non-combustible solids
Water hazard class	1  slightly water hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS Number Basis of classification Component name 1305620 65997151