ARDEX G10 Premium Flexible Grout Cement Gray 5kg Bucket

ARDEX G 10 PREMIUM Flexible Joint Filler

• Cement-based joint filler
• For joints of ceramic tiles and slabs as well as glass mosaics, glass tiles, and natural stone
• Enhanced color stability
• Suitable for joint widths of 1 – 10 mm
• Good edge adhesion
• Easy to grout with a long wash-out window
• No surface blooming

Product description:
PREMIUM Flexible Joint Filler with particularly high color stability for joint widths of 1 – 10 mm, suitable for walls and floors, indoors and outdoors. Suitable for all ceramic tiles and slabs, as well as glass mosaics, glass tiles, and natural stone.

ARDEX G 10 is a cement-bound premium joint filler with special fillers and additives for fine joint surfaces, optimal processing quality, enhanced color consistency regardless of the water absorption of the substrate material, and a long wash-out window.

ARDEX G 10 PREMIUM Flexible Joint Filler has water- and dirt-repellent properties after curing, which positively affect the visual appearance, texture, and durability of the coverings. Its high deformability and good edge adhesion reduce stress in thermally stressed areas and significantly contribute to the longevity of the coverings.

Like the preventive protection against mold formation, ARDEX G 10 meets the requirements of CG2 WA according to EN 13888 and is very low-emission EC 1 R PLUS according to GEV EMICODE.

Technical data:
Certified according to DIN EN: CG2 WA
GISCODE: ZP 1 cementitious product

Material requirement:

• Approximately 0.45 kg/m² for 10 x 10 cm
• Approximately 0.35 kg/m² for 15 x 15 cm
• Approximately 0.20 kg/m² for 30 x 30 cm
• Approximately 0.15 kg/m² for 30 x 60 cm
• Approximately 0.10 kg/m² for 60 x 60 cm

Ball pressure hardness:

• After 1 day approx. 2700 N/m²
• After 3 days approx. 4300 N/m²
• After 7 / 28 days approx. 4800 N/m²

Storage: In dry rooms, approximately 12 months in the original sealed container

Mixing ratio: approximately 170 l water : 500 kg ARDEX G 10

Safety Data Sheet
Data sheet	281367pdf
Revised by supplier on	26092018
Occupational safety and storage
GHS hazard statements	H315 Verminderung/Reizung der Haut, Gefahrenkategorie 2 H318 Verursacht schwere Augenschäden H335 Kann die Atemwege reizen
P-Sätze	Bitte Abschnitt 22 des Sicherheitsdatenblattes beachten P102 Darf nicht in die Hände von Kindern gelangen P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/Aerosol vermeiden P280 Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz/Gehörschutz tragen P302P352 BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/waschen P305P351 P338 Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen, Weiter ausspülen
Lagerklassen	13 Nicht brennbare Feststoffe, die keiner der vorgenannten LGK zuzuordnen sind
Wassergefährdungsklasse	1  schwach wassergefährdend
Gefahren
Signalwort	Gefahr
GHS-Piktogramme
Ingredients
CAS Number Basis of Entry Substance Name 65997-15-1