PCI Durapox Premium No. 47 Anthracite 5 kg Bucket

PCI Durapox Premium epoxy mortar for grouting and laying tiles

Product features:

• Very smooth jointing behavior similar to cement-based joint mortars
• Very easy washing behavior similar to cement-based joint mortars
• No residual haze when used with PCI Durapox Finish
• Very color-bright and homogeneous joint surface
• Available in 13 different shades
• Very easy to clean, easy to clean effect
• Chemically resistant, resistant to many acids, alkalis, fats, and oils
• Water-impermeable and vapor-retardant
• High abrasion resistance
• Temperature shock resistant, even with short-term steam jet exposure
• Tested according to DIN EN 12004: PCI Durapox Premium complies with R2T

Colors: No 01 brilliant white, No 02 bahama beige, No 16 silver gray, No 22 sand gray, No 31 cement gray, No 47 anthracite, No 03 caramel, No 05 medium brown, No 23 light gray, No 40 black, No 41 dark brown, No 49 light brown, No 50 red brown
Delivery forms: 5kg bucket / 2kg bucket

Application areas:

• For indoor and outdoor use
• For wall and floor applications
• Especially for the grouting of visually high-quality surfaces such as tiles, mosaics, fine stoneware, etc.
• For chemically resistant and water-impermeable installation and grouting of wall and floor coverings
• For ceramic coverings in breweries, dairies, cheese factories, lemonade and fruit juice industries, large kitchens, butcheries, slaughterhouses, fat-processing industries, battery rooms, galvanizing plants, paint factories, bleaching plants, tanneries, paper mills, laboratories, and hospitals
• For laying and grouting in swimming pools, thermal baths, brine baths, and baths in hospitals, as well as in shower areas or wellness facilities

Substrate preparation:

• Tile installation
  The substrate must be clean, dry, load-bearing, and even. Remove residual oil and wax, chemical residues, old coatings, and moisture barriers completely. Cement screeds must not exceed 4% residual moisture. Do not apply in case of rising damp from the substrate.
• Grouting
  The joints must be clean, dry, free of grease and dust. After laying, scrape the joints evenly and clean thoroughly. The laying mortar or tile adhesive must be fully cured.

Application of PCI Durapox Premium:
See technical data sheet
nbsp;

Safety Data Sheet
Data sheet	Safety Data Sheet PDF
Revised by supplier on	17072017
GHS link
Occupational safety and storage
GHS hazard statements	EUH205 Contains epoxy components. May cause allergic reactions H315 Causes skin irritation H317 May cause allergic skin reactions H319 Causes serious eye irritation H412 Harmful to aquatic life with long-lasting effects
Precautions	Please observe section 22 of the safety data sheet P261 Avoid inhalation of dust/fume/gas/mist/vapor/aerosol P264 Wash thoroughly after handling P272 Do not wear contaminated clothing outside the workplace P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P301P330P331 IF SWALLOWED: Rinse mouth. Do not induce vomiting P303P361P353 IF ON SKIN or hair: Remove contaminated clothing. Wash skin with water/douche P304P340 IF INHALED: Bring the person into fresh air and ensure unobstructed breathing P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P310 Immediately call a poison center/doctor/hellip; P362P364 Remove contaminated clothing and wash before reuse P391 Collect spillage P405 Store under lock and key P501 Dispose of contents/container in accordance with local regulations
Storage classes	13 Non-combustible solids
Water hazard class	2 water hazardous
Hazards
Signal word	Warning
GHS pictograms
Ingredients
CAS number Absorption route Substance name 65997151 2855132 2372829 1305788 919302 161278359