Go to the consent manager Skip to main content Skip to search Skip to navigation Jump to footer
weberdur 120 mineral cement plaster 30kg natural gray
liWitterungs- und Frostbeständigli liWasserabweisendli liMechanisch hoch belastbarli

Mit dem Bauschnell ChatGPT Assistent chatten

Information on product safety Manufacturer EU Responsible Person

Quantity
9,90 €
0,33 € per 1 kg
incl. 19% VAT , plus shipping costs
Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)
Bag(s)
weberdur 120 zement-putz mineralischer zementputz...
weberdur 120 mineral cement plaster 30kg natural gray
9,90 € *
0,33 € per 1 kg
0,33 € per 1 kg

weberdur 120 Cement Plaster 1mm 30kg natural gray

Mineral cement plaster for the production of highly stressed surface coatings


Substrate
Weakly absorbing substrate, smooth non-absorbent substrate

Grain sizes
Approximately 1 max 2 mm

Color tone
Natural gray

Application thickness
10 mm to 20 mm

Water requirement
Approximately 55 l per 30 kg

Storage
When stored dry and protected from moisture, the material is storable for up to 1 year

Application area
weberdur 120 is used indoors and outdoors on masonry according to DIN 1053. it is particularly suitable for permanent wet areas, e.g., building base or walls in the ground, or walls exposed to high mechanical stress, as well as as a backing layer for waterproofing. For use in swimming pool areas, we recommend the weberplan 819 leveling compound quickly

Product features
Weather and frost resistant, water-repellent, mechanically highly durable

General notes
The mortar must not contain any additives.
During processing and drying, the temperature of the air, materials, and substrate must not fall below 5°C.
Fresh plaster surfaces must be protected from direct sunlight, strong wind, or moisture.
Application and execution according to DIN 18 350 VOB and DIN 18 550.
Consumption figures refer to the minimum layer thickness and may vary depending on substrate and processing. Exact consumption values should be determined through trial surfaces on the object.
Adjacent components must be separated from the plaster system.
Sinter skin must be removed before applying additional layers.

Special notes
The mortar is not suitable for insulating masonry.

Safety Data Sheet
Safety Data Sheet PDF
04.03.2015

Work safety and storage

Hazard statement
Causes skin irritation
Precautionary statements
Keep out of reach of children
Read label before use
Wear protective gloves, protective clothing, eye protection, face protection
IF ON SKIN: Wash with plenty of soap and water
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor
Remove contaminated clothing
Dispose of contents/container in accordance with local regulations

Hazard classification

1 Slightly water hazardous

Danger

Danger
Health hazard
GHS07 Health hazard
Environmental hazard
GHS05 Environmental hazard

Ingredients

CAS NumberIntended useSubstance name
65997151NBS
1305620NBS

Technisches Datenblatt:

Sicherheitsdatenblatt:

Write the first review for this item and help others make a purchase decision!:

Contact data
All fields marked with * are mandatory.
Question about item

Please see our privacy notice

Loading ...