webertop 204 AquaBalance Mineral Mineral Render with Jura Structure Grain and Glimmer biocidal free
Application Area
webertop 204 AquaBalance is a mineral mineral render with Jura structure grain and glimmer, biocidal free. It is suitable as an exterior and interior top coat on strongweberdur substrates, as well as an exterior coating for strongwebertherm, mineral insulation render, and strongwebertherm systems.
Product Properties
- Free of biocides and preservatives
- Surface-active, hydrophilic, for a balanced moisture content
- Creates a healthy indoor climate through optimal vapor permeability
- Offers high rain protection according to durability class III in accordance with DIN 4108
- Self-cleaning effect
- Light reflection due to glimmer particles, mineral, breathable mineral render structure
- Machine and hand application possible
General Notes
- Freshly applied surfaces should be protected from direct sunlight, strong wind, and moisture exposure
- Application and execution according to DIN 18 350 VOB and DIN 18 550
- Consumption figures refer to minimum layer thickness and may vary depending on substrate and application. Exact consumption values should be determined through trial surfaces on site.
- Adjacent components must be separated from the render system
Special Notes
- Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the color tone of the render may differ from the sample. This does not constitute a quality defect or material complaint.
- Order material for a project in one go to ensure uniform color; mix different batches together.
webertop 204 AquaBalance with balanced moisture content offers very high and durable protection against algae and mold growth. It permanently reduces moisture and dirt adhesion, e.g., in splash water areas with improper drainage or in planting areas near facades, which can promote algae and mold growth.
Grain Sizes
- 3 mm
- 4 mm
- 5 mm
Standard Color
Diamond 0010
Water Requirement
Approx. 42 l per 25 kg
Storage
Stored in a dry, moisture-protected environment, the material is storable for up to 1 year.
Consumption and Coverage | ||
---|---|---|
Thickness | Approx. 220 kg/m2 | Approx. 11 m2 per 25 kg |
Thickness | Approx. 240 kg/m2 | Approx. 10 m2 per 25 kg |
Thickness 5 mm | Approx. 250 kg/m2 | Approx. 10 m2 per 25 kg |
Safety Data Sheet
Download Safety Data Sheet |
Revised by supplier on 13.05.2014 |
Workplace Safety and Storage
H315 | Causes skin irritation |
H318 | Causes serious eye damage |
H335 | May cause respiratory irritation |
P101 | Read the safety data sheet before use |
P102 | Keep out of reach of children |
P103 | Read the label before use |
P280 | Wear protective gloves, protective clothing, eye protection, and face protection |
P302+P352 | IF ON SKIN: Wash with plenty of soap and water |
P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. |
P310 | Immediately call a poison center or doctor |
P362 | Take off contaminated clothing |
P501 | Dispose of contents/container in accordance with local regulations |
Storage Class
Class 13
Non-combustible solids
Water hazard class 1, slightly water hazardous
Hazard Information
Signal Word | Danger |
GHS Pictogram | GHS07 |
Health Hazard | GHS05 |
Hazard Statement |
Schanzenstraße 84
Nordrhein-Westfalen
Düsseldorf, Deutschland, 40549
info@sg-weber.de
https://www.sg-weber.de
Schanzenstraße 84
Nordrhein-Westfalen
Düsseldorf, Deutschland, 40549
info@sg-weber.de
https://www.sg-weber.de
- Color: colored
- Container: 2-3 hoursBag
- Surface weight: Mineral plaster
- Grains: 3 mm5 mm4 mm
- Standing height: Suitable for damp rooms
- Clothing size: P II
- Item weight: 1.050,00 kg
- Content: 1.050,00 kg
- GoogleShopping: Hauptsortiment