knauf lustro klebe und armiermörtel 20 kg sack

42x KNAUF LUSTRO 20kg Microfiber Mortar 1.2mm

42 Bags/Palette KNAUF LUSTRO 20kg Microfiber Mortar 1.2mm

System-tested, mineral-based, highly economical and ultralight adhesive and reinforcement mortar for Knauf WARMWAND systems Basis, Plus, and Natur. Also suitable as a renovation and bonding mortar when using lightweight undercoats.

Properties:

Compressive strength class CS II according to DIN EN 998-1
Fiber and adhesion additive
Lightweight aggregate made of polystyrene
Water-repellent
High bonding strength
Diffusion-open
Grain size 1.2 mm
Color tone natural white

Application area:

System-tested, mineral-based, universal all-rounder for facades. Lustro is particularly suitable for bonding and reinforcing Knauf WARMWAND systems. It is also well suited as a universal renovation mortar for refurbishments.
System-tested adhesive and reinforcement mortar for thermal insulation composite systems
Renovation mortar for refurbishments
Plaster bonding bridges

Execution:

Adhesive mortar: The adhesive application is usually carried out by point-edge bonding with a bonding surface of approximately 40%. Immediately, or at the latest after 10 minutes, press into the fresh adhesive mortar bed, embed, and press firmly. Allow a minimum stand time of 48 hours before further work.
Reinforcement mortar: Embed reinforcement fabric fully in the mortar, with edges overlapping at least 100 mm, wet-on-wet, in the outer third of the reinforcement layer, close to the surface. The reinforcement fabric must be completely covered by Lustro. Layer thickness of the reinforcement layer on thermal insulation composite systems: 57 mm, on substrates: approx. 4 mm.