webertop 204 AquaBalance Mineral Mineral Render with Jura Structure Grain and Glimmer biocidal free
Application Area
webertop 204 AquaBalance is a mineral mineral render with Jura structure grain and glimmer, biocidal free. It is an exterior and interior top coat for strongweberdur substrates as well as a surface coating for strongwebertherm. It can be used as a clay plaster and for strongwebertherm systems.
Product Properties
- Free of biocides and preservatives
- Surface-active, hydrophilic for balanced moisture content
- Creates a healthy living environment through optimal water vapor permeability
- Offers high rain protection according to durability class III after DIN 4108
- Self-cleaning effect
- Light reflection due to glimmer particles
- Mineral, open-pored, breathable mineral render structure
- Machine and hand application possible
General Notes
- Freshly applied surfaces should be protected from direct sunlight, strong wind, or moisture exposure
- Application and execution according to DIN 18 350 VOB and DIN 18 550
- Consumption figures refer to minimum layer thickness and may vary depending on substrate and processing. Exact consumption values should be determined through trial surfaces on site.
- Adjacent components must be separated from the render system
Special Notes
- Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the color tone of the render may differ from the sample. This does not constitute a quality defect or justified material complaint.
- Order a single batch for a project whenever possible. Mix different batches together.
webertop 204 AquaBalance, with balanced moisture content, offers very high and durable protection against algae and mold growth. It permanently reduces moisture and dirt adhesion, e.g., in splash water areas with faulty drainage or in planting areas near facades, which can promote algae and mold growth.
Color Number 30094
Light Reference Value (HBZ) 54
Status Code Abr
Grain Sizes 3 mm
Standard Color Diamant 0010
Water Requirement approx. 42 l per 25 kg
Storage
Stored in a dry, moisture-protected environment, the material remains storable for up to 1 year.
Consumption and Coverage | ||
---|---|---|
Layer thickness | Approx. 3 mm | Coverage |
Approx. 220 kg/m² | at 3 mm | ca. 11 m² per 25 kg |
Approx. 4 mm | ca. 240 kg/m² | ca. 10 m² per 25 kg |
Approx. 5 mm | ca. 250 kg/m² | ca. 10 m² per 25 kg |
Safety Data Sheet
Safety Data Sheet | |
---|---|
Download Safety Data Sheet | |
Revised by supplier on 13.05.2014 | |
Workplace Safety and Storage | |
H315: Causes skin irritation | |
H318: Causes serious eye damage | |
H335: May cause respiratory irritation | |
P280: Wear protective gloves, protective clothing, eye protection, and face protection | |
P302+P352: IF ON SKIN: Wash with plenty of water | |
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. | |
P310: Immediately call a poison center or doctor | |
P362: Take off contaminated clothing | |
P501: Dispose of contents/container in accordance with local regulations | |
Storage Class | |
Class 13 | |
Non-combustible solids | |
Water hazard class 1 (slightly water hazardous) | |
Hazards | |
Signal Word | Danger |
GHS Pictogram | GHS07 |
Health hazard | GHS05 |
Ingredients | |
CAS Number | 15997151 |
Additional information | |
Stoffname | 1305620 |
- Color: colored
- Container: Bag
- Surface weight: Mineral plaster
- Grains: 3 mm
- Standing height: Suitable for damp rooms
- Clothing size: P II
- Item weight: 25,00 kg
- Content: 25,00 kg
- GoogleShopping: Aktion