KNAUF Insulation Haftklebeband LDS Soliplan 60mm 40m

KNAUF Insulation Haftklebeband LDS Soliplan 60mm 40m

For permanently airtight bonding of overlaps and joints in interior areas. Part of the Knauf Insulation airtight sealing system, which is certified for its long-term functionality and aging resistance.

Advantages

• Optimal for vapor barrier membranes and wood-based panels such as OSB
• Especially strong adhesion and aging resistance
• Easy application by hand tearability
• Free of solvents
• Complies with DIN 4108 Part 7, SIA 180, ÖNORM B 81102, EnEV, ETAG 007

Product Description

Acrylic adhesive tape on kraft paper basis for overlapping vapor barrier membranes and airtightness layers according to DIN 4108 Part 7, SIA 180, ÖNORM B 81102, EnEV, and ETAG 007, as well as for connection sealing on suitable substrates. Part of the Knauf Insulation airtight sealing system, which is certified for its long-term functionality and aging resistance.

Aging resistance of the bonds

Properly bonded joints with certified system components are highly aging resistant (>50 years). Test report from the University of Kassel confirms this and meets the requirements of ETAG 007 guideline for European technical approval, and the guideline for timber frame construction.

Suitable substrates

• LDS system vapor barrier membranes
• Polyamide and aluminum foils, as well as polyethylene foils according to DIN EN 13984
• Polypropylene spunbond membranes according to DIN EN 13984 and DIN EN 13859
• Kraft paper
• Wood-based panels with a solid surface, e.g., panels made of long, flat oriented strands suchli OSB according to DIN EN 300
• Corrosion-resistant metal substrates and planed wooden components in interior areas

The valid processing guidelines must be observed.

Substrate condition

The adhesive substrate must be load-bearing, dry, clean, free of sand, dust, grease, and silicone. Non-certified substrates must be checked for their adhesive suitability before starting work; if necessary, adhesive tests should be conducted. Bonding on frozen or overly frozen substrates is not possible. Outgassing release agents, slip agents, and flame retardants on foil surfaces can reduce the aging resistance of the bond.