KNAUF Red Lime Felt 05 and 1 Fine Felt Plaster with Marble Grain
Marble Edging Plaster as the finest felt plaster or with free structure for creating decorative fine-structured surfaces on interior wall surfaces. In combination with Red Lime Primer or Red Lime Fine, specially suitable where high building physics requirements are placed on room hygiene, indoor air quality, and living comfort.
Properties
- High-quality plaster mortar CR, compressive strength category CS I according to DIN 9981
- For interior use
- Moisture-regulating and vapor-permeable
- Positively influences the room climate
- Low tension
- Easy to process
- Application with machine or by hand
- Color tone white, approx. RAL 9016
- Can be tinted within the Knauf ColorConcept
Application Area
- In combination with Red Lime Primer or Red Lime Fine, especially suitable when high building physics requirements are placed on room hygiene, indoor air quality, and living comfort
- Mineral surface plaster on Red Lime Primer and Red Lime Fine in interior areas
- Mineral surface plaster on lime-cement plasters in interior areas
- Mineral surface plaster on gypsum plasters
- Mineral surface plaster on gypsum boards and gypsum wall construction panels
Execution
Apply Red Lime Felt approximately 1–3 mm thick on Red Lime Primer using a trowel or smoothing float, level or structure as desired, and finish by felting or brushing. For optimal results, apply Red Lime Felt in grain size or textured and fully covering, then allow to dry. Subsequently, apply a second layer, level, and let dry. The applied material can later be abraded with the Red Lime Sponge Disc without adding water.
Preparation
For manual processing, mix the contents of the bag with the specified amount of clean water without additives. For machine processing, adjust the water addition to achieve the correct consistency during startup.
Application
Apply the Red Lime Surface Plaster in the specified thickness onto the substrate and level with a trowel or smoothing float. Achieve the best result with a fully covering application in grain size. Let the first coat dry, then apply and level the second coat.
Felting
The applied material can subsequently be abraded with the Red Lime Sponge Disc without additional water. Adjacent surfaces should be finished on the same day.
Safety Data Sheet | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Safety Data Sheet PDF | ||||||||||
06.05.2015 | ||||||||||
Occupational Safety and Storage | ||||||||||
H315 Causes skin irritation H318 Causes serious eye damage H335 May cause respiratory irritation | ||||||||||
P102 Keep out of reach of children P261 Avoid breathing dust, fumes, gas, mist, vapors, or aerosols P280 Wear protective gloves, protective clothing, eye protection, face protection P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P310 Immediately call a poison center or doctor P501 Dispose of contents/container in accordance with local regulations | ||||||||||
Storage Classes | ||||||||||
13 Non-combustible solid | ||||||||||
1, slightly water hazardous | ||||||||||
Hazards | ||||||||||
Danger | ||||||||||
![]() ![]() | ||||||||||
Ingredients | ||||||||||
|
Am Bahnhof 7
Baden-Württemberg
Iphofen, Deutschland, 97346
info@knauf.de
https://www.knauf.de
Am Bahnhof 7
Baden-Württemberg
Iphofen, Deutschland, 97346
info@knauf.de
https://www.knauf.de
- Container: Bag
- Item weight: 25,00 kg
- Content: 25,00 kg
- GoogleShopping: Hauptsortiment