Go to the consent manager Skip to main content Skip to search Skip to navigation Jump to footer
KNAUF SM300 Adhesive and Reinforcing Mortar 25kg 10mm Bonding Additive
System-tested mineral adhesive and reinforcement mortars for Knauf WARMWAND systems Basis Plus and Keramik. Also suitable as renovation and bonding mortars.

Mit dem Bauschnell ChatGPT Assistent chatten

Information on product safety Manufacturer EU Responsible Person

Variation
from 15,90 €
0,64 € per 1 kg
incl. 19% VAT , plus shipping costs
Available immediately
Bag(s)

This item has variations. Please select the requested variation.

0,64 € per 1 kg

KNAUF SM300 Adhesive and Reinforcing Mortar 25kg 10mm Bonding Additive

System-tested mineral-based adhesive and reinforcing mortar for Knauf WARMWAND systems Basis Plus and Ceramic. Also suitable as a renovation and bonding mortar.

Properties

  • Compression strength category CS III according to DIN EN 998-1
  • With bonding additive
  • Highly water-repellent
  • High bonding strength
  • Diffusion-open
  • Grain size 10 mm
  • Color tone gray

Application Area

  • System-tested mineral universal all-rounder for facades and bases. SM300 is particularly suitable for bonding and reinforcing all Knauf WARMWAND systems. Also as a universal renovation mortar for reworking, SM300 is ideally suited.
  • System-tested mineral bonding and reinforcing mortar for wall insulation composite systems
  • Renovation mortar for reworkings

Rendering Bonding

The adhesive is usually applied by point or edge bonding with a bonding surface of 40 mm. Plasterboards must be pressed into the fresh adhesive bed within 10 minutes, pressing and embedding them. Before further work, a stand time of at least 48 hours must be observed.

Reinforcing Mortar

Reinforcing mesh must be embedded fully wet-in-wet, with a minimum overlap of 100 mm at the joints, in the surface of the mortar. The mesh must be completely covered by SM300. The layer thickness of the reinforcing layer on wall insulation composite systems is 5-7 mm; on substrates approximately 4 mm.

Sicherheitsdatenblatt

Sicherheitsdatenblatt.pdf
16.04.2015

Arbeitsschutz und Lagerung

H315
Verursacht Hautreizungen
H318
Verursacht schwere Augenschäden
H335
Kann die Atemwege reizen
Bitte Abschnitt 22 des Sicherheitsdatenblattes beachten
P102
Darf nicht in die Hände von Kindern gelangen
P261
Einatmen von Staub, Rauch, Gas, Nebel, Dampf, Aerosol vermeiden
P280
Schutzhandschuhe, Schutzkleidung, Augenschutz, Gesichtsschutz tragen
P305+P351+P338
BEI KONTAKT MIT DEN AUGEN einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P310
Sofort GIFTINFORMATIONSZENTRUM oder Arzt anrufen
P501
Inhalt/Behälter gemäß örtlichen Vorschriften entsorgen

Gefahren

1, schwach wassergefährdend

Gefahrenhinweis

Gefahr
Austendreizend
GHS05 Austendreizend
Gesundheitsgefahrend
GHS07 Gesundheitsgefahrend

Inhaltsstoffe

CAS-NummerAufnahmegrundStoffname
1305620Zinkoxid
65997151Calciumaluminat

  • Container: Bag2-3 hours
  • Item weight: 25,00 kg
  • Content: 25,00 kg
  • GoogleShopping: Hauptsortiment

Technisches Datenblatt:

Sicherheitsdatenblatt:

Write the first review for this item and help others make a purchase decision!:

Contact data
All fields marked with * are mandatory.
Question about item

Please see our privacy notice

Loading ...