KNAUF Spezialhaftklebeband LDS Solitop 60mm 40m
Armed HDPE Special Adhesive Tape
Product Description
Reinforced special adhesive tape based on polyethylene for bonding overlaps and sealing penetrations on underlays and underdeck membranes as well as airtightness layers in the area of overlaps, penetrations, and joints according to DIN 4108 Part 7, SIA 180, ÖNORM B 81102, EnEV, and ETAG 007.
LDS Solitop is a specially developed adhesive tape for outdoor applications and is particularly suitable for roof renovation of outdoor areas, e.g., the Knauf Insulation KombiPlan Dämmssystem.
Suitable Adhesive Substrates
- LDS System vapor barrier membranes
- Polyamide and aluminum foils as well as polyethylene foils according to DIN EN 13984
- Polypropylene spunbond membranes according to DIN EN 13984 and DIN EN 13859
- Uncoated kraft paper
- Wood-based panels with a solid surface, e.g., panels made of long, flat, aligned spruce, OSB according to DIN EN 300
- Corrosion-resistant metal substrates
- Sanded wooden components
- PVC and PE components, bonding on plasterboard and fiber-reinforced plasterboards
- Wood-based and wood fiberboard panels, as well as rough-sawn timber components, must be primed with LDS Primer before bonding
The applicable processing guidelines must be observed.
Substrate Condition
The adhesive substrate must be load-bearing, dry, clean, free of sand, dust, grease, and silicone. Non-certified substrates must be checked for their adhesion suitability before starting work; if necessary, adhesion tests should be conducted. Bonding on frozen or overly frozen substrates is not possible. Diffusing separation, slip, and flame retardant agents on foil surfaces can reduce the aging resistance of the bond.
Bondings in outdoor areas must not be submerged in standing water.
LDS Solitop must not be applied to surfaces that remain visible later. LDS Solitop cannot be removed once applied.
- Container: Roll
- Item weight: 1,00 kg
- Content: 40,00 m
- GoogleShopping: Herbst
