PCI Gisogrund 303 SpezialHaftgrundierung 1 l Standbodenbeutel

PCI Gisogrund 303 Special Adhesion Primer for smooth non-absorbent substrates

Product properties

• Solvent-free according to TRGS 610 Giscode D 1
• Very low emissions PLUS GEVEMICODE EC 1 PLUS
• EU 200442IIAg5030
• Quick reworkable, bond-free after approximately 30 to 45 minutes
• Ready for use without mixing, applicable
• Optimized workability in roller and brush application
• High bond strength, secure adhesion of subsequent coatings
• Can be wet-fixed if no sealing is required, suitable for moderate humidity conditions, directly tiled
• Control color light yellow, the primed surface is easily recognizable
• EMICODE EC 1 PLUS
• Colors: light yellow transparent
• Packaging: 20l bucket, 5l bucket, 1l stand-up bag

Application area

• For interior and exterior use
• For walls and floors
• Priming dense, non-absorbent substrates such as terrazzo, ceramic tiles and slabs, glazed bricks, natural stones, and artificial stones
• Substrates with residual adhesive residues or asphalt slabs, or firmly bonded and ground PVC coverings
• Before laying ceramic tiles and slabs with PCI tile adhesives such as PCI FT adhesive mortar, PCI Flexmörtel, PCI Flexmörtel Schnell, PCI Nanolight, PCI Rapidlight, etc.
• Before plastering with concrete filler PCI Polycret 5 and PCI Pericret

Substrate preparation

The substrate must be firm, crack-free, clean, and dry. Old coatings and residues such as solvent-based or water-based adhesive residues must be completely removed.

Application of PCI Gisogrund 303

When working with PCI Gisogrund 303, wear safety goggles and protective gloves.

Thoroughly shake or stir PCI Gisogrund 303. Apply the primer with a brush, soft-haired broom, or roller in a cross-coat manner, avoiding puddling. Consumption approx. 90 to 130 ml/m².

Apply PCI Polycret 5, PCI Pericret, or PCI tile adhesive onto the ventilated and dried primer for laying ceramic tiles and slabs.