PCI Silcofug E Elastic Sealant 310ml Anthracite

PCI Silcofug E Elastic Sealant for Interior and Exterior Use

Product Features

• Elastic, compensates for expansion and compression movements up to 20% of the joint width, see IVD Merkblatt No. 2 Classification of Sealants
• Resistant to weather influences and UV rays, ideal for outdoor applications
• Temperature resistant up to 165°C
• Fungistatic, equipped to prevent mold and fungal growth on the sealant
• Resistant to common household cleaners and disinfectants, allowing for easy cleaning of the joint
• Very low emissions, GEV EMICODE EC 1 PLUS

Colors

• Transparent No. 01 Brilliant White
• Light No. 02 Bahama Beige
• Caramel No. 03
• Medium Brown No. 05
• Jasmine No. 11
• Anemone No. 12
• Silver Gray No. 16
• Manhattan No. 18
• Bassalt No. 19
• Light Gray No. 21
• Sand Gray No. 22
• Light Gray No. 23
• Cement Gray No. 31
• Black No. 40
• Dark Brown No. 41
• Pergamon No. 43
• Topaz No. 44
• Anthracite No. 47
• Light Brown No. 49
• Reddish Brown No. 50
• Intense Brown No. 51
• Beige Brown No. 52
• Ocher No. 53

Application Area

• For interior and exterior use
• Suitable for wall and floor joints
• Sealing of corner, movement, and connection joints in sanitary areas, including swimming pools and pool surrounds, as well as on balconies and terraces
• Sealing of joints between glass, aluminum, wood, enamel, ceramic, hard PVC, and sanitary acrylic
• Glass edge sealing on windows made of wood, anodized, and non-anodized aluminum, see DIN 18545 Part 13 and IVD Merkblatt No. 10 Glass Sealing on Wooden Windows with Sealants
• Sealing of expansion joints in profile ornament and wave glass blocks and elements

Substrate Preparation

• The joint edges or bonding surfaces must be dry, firm, and free of dust and dirt. Remove grease and oil with PCI Universal Cleaner from non-absorbent substrates.
• Deeper joints should be pre-filled with an inert DIN Polyband closed-cell polyethylene round cord. The backing material must not be foamed during application.
• Three-sided adhesion on the substrate must be avoided. Do not use bitumen or tar-containing materials.

Application of PCI Silcofug E

• Suitable for all common manual or cartridge guns, e.g., from Karl Dahm. For products in sausage packs, special pressing guns including nozzles should be used.
• Extrude the sealant
• Cut the threaded nozzle cap straight
• Unscrew and cut to size according to joint width
• Insert cartridge into the gun
• Inject PCI Silcofug E under flank pressure into the joint
• For angled connections, inject as a triangular joint
• Before skin formation, smooth the sealant with a PCI Glaumlttmittel-moistened tool
• Skin formation occurs within a few minutes. Work in sections as fresh PCI Silcofug E adheres perfectly to already cured material