weberstar 260 AquaBalance
Application area
weberstar 260 AquaBalance felt plaster is an surface coating for exterior and interior use on strongweberdur strong base coats.
Product features
Pull without biocides, preservative-free
Surface-active, hydrophilic for a balanced moisture content
Creates a healthy living climate through optimal water vapor permeability
Offers high impact resistance of class III according to DIN 4108
Machine and hand application
General notes
Pulli: Fresh plaster surfaces should be protected from direct sunlight, strong wind, or moisture exposure.
Application and execution according to DIN 18 350 VOB and DIN 18 550.
Consumption figures refer to the minimum layer thickness and may vary depending on substrate and application. Exact consumption values should be determined through trial applications on the site.
Adjacent components must be separated from the plaster system.
Special notes
Pulli: Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the plaster color tone may differ from the sample. This does not constitute a quality defect or justified material complaint.
Color deviations caused by application and drying conditions should be evened out with the weberton 414 AquaBalance leveling paint. This leveling coat should be included in specifications and offers.
Material should be ordered for a single project as much as possible; different batches should be mixed.
weberstar 260 AquaBalance with a balanced water content offers very high and durable protection against algae and mold growth.
Constantly increased moisture and dirt deposits, e.g., in splash zones, or planting near facades, can promote algae and mold growth.
Substrate preparation
The substrate must be load-bearing, dry, and free of dust and substances that reduce adhesion.
The base coat must be level.
Depending on weather conditions, the base coat should be applied in a timely manner, preferably the day before, or the universal primer weberprim 403 should be applied.
Observe the curing times of the respective base coat.
Grain sizes
0.5 mm, 1 mm, 1.5 mm
Colors
Standard white
Diamond 0010
Water requirement
Approximately 6.7 l per 25 kg
Storage
When stored dry and protected from moisture, the material remains storable for up to 1 year.
Application area
weberstar 260 AquaBalance felt plaster is an surface coating for exterior and interior use on strongweberdur strong base coats.
Product features
Pull without biocides, preservative-free
Surface-active, hydrophilic for a balanced moisture content
Creates a healthy living climate through optimal water vapor permeability
Offers high impact resistance of class III according to DIN 4108
Machine and hand application
General notes
Pulli: Fresh plaster surfaces should be protected from direct sunlight, strong wind, or moisture exposure.
Application and execution according to DIN 18 350 VOB and DIN 18 550.
Consumption figures refer to the minimum layer thickness and may vary depending on substrate and application. Exact consumption values should be determined through trial applications on the site.
Adjacent components must be separated from the plaster system.
Special notes
Pulli: Due to natural fluctuations in raw material quality and drying conditions, as well as effects of processing and structure, the plaster color tone may differ from the sample. This does not constitute a quality defect or justified material complaint.
Color deviations caused by application and drying conditions should be evened out with the weberton 414 AquaBalance leveling paint. This leveling coat should be included in specifications and offers.
Material should be ordered for a single project as much as possible; different batches should be mixed.
weberstar 260 AquaBalance with a balanced water content offers very high and durable protection against algae and mold growth.
Constantly increased moisture and dirt deposits, e.g., in splash zones, or planting near facades, can promote algae and mold growth.
Substrate preparation
The substrate must be load-bearing, dry, and free of dust and substances that reduce adhesion.
The base coat must be level.
Depending on weather conditions, the base coat should be applied in a timely manner, preferably the day before, or the universal primer weberprim 403 should be applied.
Observe the curing times of the respective base coat.
Grain sizes
0.5 mm, 1 mm, 1.5 mm
Colors
Standard white
Diamond 0010
Water requirement
Approximately 6.7 l per 25 kg
Storage
When stored dry and protected from moisture, the material remains storable for up to 1 year.
Consumption and durability | ||
Safety Data Sheet | ||
| Data sheet | Updated by supplier on 13.05.2014 | |
Work safety and storage | ||
| H315: Causes skin irritation | H318: Causes serious eye damage | |
| H335: May cause respiratory irritation | ||
| P101: If medical advice is needed, keep the container or label available | P102: Keep out of reach of children | |
| P103: Read the label before use | P280: Wear protective gloves, protective clothing, eye protection, and face protection | |
| P302 + P352: IF ON SKIN: Wash with plenty of soap and water | P305 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. | |
| P310: Immediately call a poison center or doctor | P362: Take off contaminated clothing | |
| P501: Dispose of contents/container in accordance with local regulations | ||
- Color: colored
- Container: Bag
- Surface weight: Mineral plaster
- Grains: 0.5 mm
- Standing height: Wide plank
- Clothing size: P II
- Item weight: 26,00 kg
- Content: 25,00 kg
- GoogleShopping: Hauptsortiment
