PCI Flexmörtel S1 5kg

PCI FLEXMOERTEL S1 Deformable Tile Adhesive Flex Adhesive

Product Properties:

• Meets C2TE S1 according to DIN EN 12004 and guidelines for flexible mortars
• Deformable, compensates for stresses caused by temperature fluctuations and shrinkage
• High stability, even with heavy tiles
• Suitable for adhesive bed thicknesses of 1 to 10 mm
• Very low emissions, GEV EMICODE EC 1 PLUS R
• Chromate-reduced according to TRGS 613
• Waterproof and temperature-resistant from 30°C to 80°C, suitable for indoor and outdoor use, applicable on walls and floors
• EMICODE: EC 1 PLUS R

Color: gray
Delivery form: 5kg bag

Application Area:

• For indoor and outdoor use
• For walls and floors
• For deformable bonding of tiles and slabs
• For laying cement screeds with residual moisture of at least 4% CM
• For installing ceramics on all PCI composite waterproofing systems
• For laying on heated screeds
• For installation in swimming pools, pool surrounds, wet rooms, and cold stores
• For laying on cast asphalt only indoors, as well as on all cement- and gypsum-bound substrates, glass and porcelain mosaics, firmly adhering PVC coverings, and old ceramic coverings
• For installing polyurethane foam panels on basement walls, perimeter insulation on plaster, concrete, masonry, and sealing slurries; for mineral fiber panels such as Isover or Rockwool; for foamed hard foam panels such as Styropor or Hostapor; for extruded hard foam panels such as Styrodur
• For repairing and leveling minor unevenness on walls and floors prior to tile installation

Safety Data Sheet
Data Sheet	Safety Data Sheet PDF
Reviewed by supplier on	20.07.2016
GfK link
Occupational Safety and Storage
GHS hazard statements	H315 Causes skin irritation H318 Causes serious eye damage H335 May cause respiratory irritation
Precautions	Please observe section 22 of the safety data sheet P102 Keep out of reach of children P261 Avoid inhalation of dust/fumes/gas/mist/vapors/aerosol P264 Wash thoroughly after handling P280 Wear protective gloves/protective clothing/eye protection/face protection P302P352 IF ON SKIN: Wash with plenty of water P304P340 IF INHALED: Bring person into fresh air and ensure unrestricted breathing P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P315 Get medical advice/attention immediately P332P313 If skin irritation occurs: Seek medical advice/attention P362P364 Contaminated clothing should be removed and washed before reuse
Storage classes	13 Non-combustible solids
Water hazard class	1 Slightly water hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS Number Basis of Entry Substance Name 65997-15-1