ARDEX A 828 Wall Putty

Product Description

Gypsum-based synthetic material
Wall filler with the advantages of a rapid-setting plaster
Suitable for sealing joints in gypsum board panels and other construction panels
Fill work according to quality levels Q1 and Q4
For interior use
Draws continuously into each layer thickness
Does not shrink, remains crack-free

Gluing and plastering of raw masonry, concrete, gas concrete, lightweight construction, thermal insulation, and insulating panels prior to wallpapering and painting
Filling large surface depressions on walls and ceilings
Filling cracks, holes, slots, and joints in gypsum board panels and other construction panels
Plastering wall surfaces made of calcium silicate bricks and panel elements
Sealing joints in precast concrete ceilings
Installing gypsum boards
Reinforcing and inserting brackets for fixtures, installations, etc.

Standards / Test Certificates: Non-combustible building material class A1 according to EN 13501 Part 1
Joint filler for joint sealing without joint cover strips, Type 4 B according to EN 13963
Mixing ratio: approximately 1 part water to 2 parts powder by weight (about 13 parts water to 25 kg powder, corresponding to approximately 1 RT water to 2 RT powder)
Fresh weight: approximately 15 kg
Painting and bonding work at 20°C: after drying
Storage: In dry indoor spaces for approximately 12 months in the original, tightly closed container
Shuttle weight: approximately 10 kg
Material requirement: approximately 10 kg powder per m² and mm thickness
Processing time at 20°C: approximately 30 minutes