PCI Carrafug Joint Mortar No.22 Sand Gray 5kg

PCI Carrafug Special Joint Mortar for Natural Stone Slabs

Product Features

• Crack-free, durable joint mortar that does not shrink or spall
• Fast setting, washable, and walkable after approximately 6 hours, enabling efficient work processes
• Waterproof and frost-resistant, suitable for interior and exterior use
• Widely temperature-independent expansion profile; the washing time remains approximately the same at low and high temperatures
• Does not cause edge zone discoloration on sensitive natural stones
• High joint filling degree
• Temperature resistant from -20°C to +80°C
• EMICODE EC 1 PLUS

Colors

• No. 22 Sand Gray
• No. 25 Carrara White
• No. 26 Pearl Gray
• No. 27 Jura Beige
• No. 47 Anthracite

Delivery Forms

• 5 kg bag

Application Area

• For interior and exterior use
• For wall and floor applications
• For heating screeds, balconies, and terraces
• For grouting natural stone slabs such as marble, travertine, granite, Solnhofen slabs, etc.
• For joint widths from 1 to 8 mm

Substrate Preparation

Immediately after laying the slabs, scrape and clean the joints evenly to the depth of the slab thickness. Allow the adhesive or laying mortar to mature. Do not pre-fill joints before grouting.

Processing of PCI Carrafug

Mix water in a clean container, then add PCI Carrafug and stir with a suitable drill or mixing tool attached to a drill until a homogeneous, lump-free mortar is achieved. After approximately 3 minutes, stir again.

Grouting of the surfaces can be performed with PCI Carrafug using a rubber grout float in the wall and floor areas. In floor areas, also use a rubber squeegee. Fill the joints completely and, after sufficient setting, wipe with a slightly damp sponge or sponge board. After drying, remove any remaining mortar residue with a damp sponge.

Safety Data Sheet

Hazards

Safety Data Sheet
Datenblatt	Safety Data Sheet PDF
Revised by supplier on	05.07.2016
GHS Classification
Occupational Safety and Storage
GHS Symbols
H315 Causes skin irritation
H318 Causes serious eye damage
H335 May cause respiratory irritation
Precautionary Statements
P102 Keep out of reach of children
P261 Avoid inhalation of dust, fumes, gas, mist, vapors, aerosols
P264 Wash thoroughly after handling
P280 Wear protective gloves, protective clothing, eye protection, face protection
P302+P352 IF ON SKIN: Wash with plenty of soap and water
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 IF IN CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P315 Get immediate medical advice
P332+P313 If skin irritation occurs: Seek medical advice
P362+P364 Take off contaminated clothing and wash before reuse
Storage Classes
Class 13 Non-combustible solid
Water Hazard Class	1, slightly water hazardous
Signal Word	Danger
GHS Pictogram
GHS Health Hazard Pictogram