PCI Nanofug Premium 15kg No. 19 Basalt

PCI Nanofug Premium Variable Flexible Joint Filler 15kg for all ceramic tiles, glass mosaics, glass tiles, and all natural stone coverings

Product features:

• Very easy to clean thanks to the easy to clean effect
• Enhanced resistance to acidic household cleaners
• Improved protection against certain molds and microorganisms
• Very high processing comfort with a processing window of approximately 40 minutes
• Fast setting but no burning
• Fine surface and brilliant coloration
• Meets CG2 WA according to DIN 13888:2009
• Low emissions, GEV EMICODE EC1 Plus R
• Low in chrome
• EMICODE: EC 1 PLUS R

Colors: No. 16 silver gray, No. 19 basalt, No. 21 light gray, No. 22 sand gray, No. 31 cement gray, No. 47 anthracite, No. 02 Bahama beige, No. 03 caramel, No. 05 medium brown, No. 11 jasmine, No. 12 anemone, No. 18 Manhattan, No. 20 white light, No. 23 light gray, No. 27 Jura beige, No. 40 black, No. 41 dark brown, No. 43 Pergamon, No. 44 topaz, No. 49 light brown, No. 50 reddish brown, No. 51 intense brown, No. 52 beige brown, No. 53 ocher

Delivery form: 5kg bucket

Application areas:

• For indoor and outdoor use
• For wall and floor applications
• For joint widths of 1 – 10 mm
• For all ceramic tiles, glass mosaics, and glass tiles
• For all natural stones
• In residential areas, in building interiors, showers, on balconies, terraces, facades, in public and commercial areas with high moisture exposure, e.g., shower installations, saunas, toilet facilities, in sales and presentation areas
• On heated screeds, dry screeds, concrete prefabricates, plasterboard, plaster panels, wood chipboards, wooden panels, and in areas with strong temperature fluctuations

Substrate pretreatment:
Immediately after laying the tiles, scrape the joints evenly deep to the tile thickness and clean.
Allow the adhesive or laying mortar to mature.

Processing of PCI Nanofug Premium:

1. Pour the mixing water according to the ratio specified in a clean working container, add PCI Nanofug Premium, and immediately stir with a suitable stirrer or mixing device, e.g., from Collomix, as an attachment to a drill, to a homogeneous, lump-free mortar.
2. Stir again after approximately 3 minutes of maturation.
3. Apply the joint filler with PCI rubber jointing disc into the joints and allow to set. Optionally, rework with PCI Nanofug Premium for a dense finish. After sufficient setting, wash off with a slightly damp, firm sponge or sponge board.
4. After drying, remove any remaining mortar film with a slightly damp sponge.

Please note:

• Do not process at substrate temperatures below 5°C or above 25°C, or in direct heat, exposure to water, or drafts.
• Higher temperatures shorten, lower temperatures extend the processing time. Newly grouted surfaces outdoors should be protected from sunlight and strong drafts.
• During grouting and curing, the floor heating must be switched off for at least 24 hours.
• If a white film remains on the ceramic surface after drying, it can be removed after 2 to 3 days with a cement film remover. Thoroughly pre-clean joints and surfaces and rinse thoroughly with plenty of water afterward.
• Frequent, intensive use of acidic cleaners or prolonged exposure to cement-aggressive media can attack the joint. Clean joints thoroughly before and after cleaning with plenty of water.
• When grouting slip-resistant or textured floor coverings, residual film must be carefully removed while still fresh. Conduct a test grouting or cleaning first.
• For polished fine stoneware, color pigments may settle in micro-pores of the surface. Avoid strong color contrast between tile and joint. Conduct a test grouting if unsure.
• When grouting sharp-edged tiles, see brochure "Working and Advertising Material for Tile Installers" for the jointing fleece used for washing.
• For black color, increased cleaning effort is required.
• Before grouting, secure edge joints and movement joints by inserting styrofoam strips or foam profiles. Remove protective strips before elastic grouting. Use PCI Silcofug E or PCI Silcoferm S for joints between tiles, fixtures, and pipes, and PCI Elritan 100 for facade joints.
• Use preferably only joint mortars with the same batch number on the same object.
• Mixing PCI Nanofug Premium with quartz sand can alter the original color tone.

Safety Data Sheet
Data sheet	Safety Data Sheet PDF
Revised by supplier on	08062017
GHS link
Occupational safety and storage
GHS hazard statements	H315 Causes skin irritation H318 Causes serious eye damage H335 May cause respiratory irritation
Precautions	Please observe section 22 of the safety data sheet P102 Keep out of reach of children P261 Avoid inhalation of dust/fumes/gas/mist/vapor/aerosol P264 Wash thoroughly after handling P280 Wear protective gloves/protective clothing/eye protection/face protection P302P352 IF ON SKIN: Wash with plenty of water P304P340 IF INHALED: Bring the person into fresh air and ensure unrestricted breathing P305P351P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P315 Get medical advice/attention immediately P332P313 If skin irritation occurs: Seek medical advice/attention P362P364 Take off contaminated clothing and wash before reuse P501 Dispose of contents/container in accordance with local regulations
Storage classes	13 Non-combustible solids
Water hazard class	1 slightly water hazardous
Hazards
Signal word	Danger
GHS pictograms
Ingredients
CAS Number Basis for classification Substance name 65997151